474999
10
Zoom out
Zoom in
Previous page
1/19
Next page
MAIN MENU
P7
English
5.1.1 Channel Manager
You can change the order of the channels, move, delete and edit channels. To change the
satellite, use the RED button.
Sort (GREEN button)
You can sort channels by “Name a~z”, “Name z~a”, “Free-CA”, “Fav–NO Fav” or “Frequency
Low-High”.
Edit (YELLOW button)
Select the channel you want to edit and press YELLOW (EDIT) to move into the modify
program menu to modify Program Name, Frequency, Symbol rate, Video PID, Audio PID.
Move channel
Press
pq to focus on channel, press tu to point the focus to column “Move” and press
OK to confirm selection of the channel. Use
pq to move the channel to its new location and
press OK to confirm. Repeat this for every channel you want to move.
Delete channel
Press
pq to focus on channel, press tu to point the focus to column “Del” and press OK
to mark the channel to be deleted. Press EXIT and confirm the channel’s deletion by selecting
OK and pressing OK.
Delete all channels
To delete all channels from current satellite, press BLUE (Del All). You will be asked to
confirm operation.
5.1.2 Favourites Manager
Press pq to select the channel and tu to point the focus to the favourite group. Press
OK to add the selected channel to the favourite group. Repeat same operation to remove
the channel.
5.2 Installation
The installation menu contains sub-menus “Antenna Installation”, “Auto Scan” and “Manual
Scan”.
5.2.1 Antenna Installation
You can add, edit and delete a satellite in this menu.
Add satellite
Press RED button, a satellite list will appear. Press
ut to select the satellite. If the satellite is
not in the list, select “NEW SAT1”. After selection of a satellite, the Configure Antenna menu will
appear. Please set the LNB Type, LNB Low Freq, LNB High Freq, Band control, Polarisation
control, DiSEqC Switch and Antenna mode. Further steps of installation are described in 4.2.
Edit satellite
If the parameters of the satellite were changed or the satellite is a new satellite, you must set the
parameters of the satellite, such as LNB type, LNB low Freq, LNB High Freq, Transponder, LNB
Power, 22k Tone, DiSEqC and Antenna Mode. Sequence of editing of satellite parameters is
same as sequence of “Add satellite” described in 4.2
Delete satellite
If you want to delete a satellite from the list, press YELLOW. A warning message will appear.
Select OK and press OK to confirm.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson TSR 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson TSR 200 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson TSR 200

Thomson TSR 200 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info