658788
13
Zoom out
Zoom in
Previous page
1/30
Next page
English
9
4.1 Language selection
When you use your receiver for the first time, the “Bevorzugte Sprache” (Preferred Language) menu
appears. Use pq to select the desired language. Once you have selected your language, press the
GREEN Next button to go to the next page.
4.2 Region, Subtitles, Scan Mode and screen settings
The receiver will now show the “First Time Installation” screen where you can adapt some of the most
important settings. Use pq to move to the desired setting and use tu to change values. Press the
GREEN Next button to go to the next page or press the RED Back button to go one step back. The
following settings are available:
Region: The region is pre-set to Germany. The receiver can only be used in Germany.
Subtitle: Select On to display subtitles per default, select Off to hide subtitles per
default.*
Aspect Mode: Use this option to select the aspect ratio of the connected TV. The options are:
4:3 for a 4:3TV (black bars on top and bottom of picture) and 16:9 for 16:9 TV
sets.
Scan mode: Select All to store scrambled and free-to-air channels or select Free to store only
free-to-air channels.
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via
Teletext if available.
When all settings have been made, press the GREEN Next button to continue.
4.3 Aerial Adjustment
This part of the wizard is of great help when setting up your antenna system.
Use pq to move the highlight to the setting you wish to change and use tu to change values. The
following settings are available:
Antenna Power: Set to On if you use an active antenna (with built-in amplifier). When set to On,
5V will be present at the ANT IN connector of the receiver. Select Off for passive
antennas.
Channel No.: Select a channel that is known to carry a broadcast signal in your region. The
Signal Strength and Signal Quality bars give a visual indication of the reception.
Adjust your antenna to obtain maximum signal strength and quality.
When all settings have been made, press the GREEN Next button to start scanning.
The receiver will search for all available channels. When the scan is finished, the receiver switches to
viewing mode. Now you can enjoy watching your favourite TV channels. If you get the message “No
channels found”, then check again the antenna, coaxial cable, connector and in menu if you have
reception. When this has been checked, reset the unit and follow the installation wizard again as
shown below.
NOTE: If the receiver won’t start after switching on the receiver for the first
time, reset the receiver to factory settings by pressing the MENU
button and selecting Load Factory Setting in the menu Installation.
(DEFAULT PIN: 0000).
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THT741 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THT741 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THT741

Thomson THT741 User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info