658788
9
Zoom out
Zoom in
Previous page
1/30
Next page
English
5
Warning: The batteries should not be recharged, disassembled, electrically
short-circuited, be mixed or used with other types of batteries. If
rechargeable accumulators instead of batteries are going to be used
(e.g. NiMH), we recommend using types with low self-discharge to
ensure long time operation of your remote control.
1.5 Usage of external USB devices
- It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible to USB
2.0 specifications, recording, playback and other multimedia functions of the receiver might not
work properly.*
- To ensure best performance of your USB storage device please format it via your receiver (through
the menu “Multimedia”) to FAT32system. Other file systems are not all supported by the receiver.
However, it is possible to use already NTFS formatted disks.
- STRONG cannot guarantee compatibility with all types of USB storage devices.
- If you are going to use external USB HDDs (Hard Disk Drives), please consider that power
specifications may exceed the supported output of your receiver (max.5V/800 mA). If so, please
connect your USB HDD to an according external power adapter.
- Playback of files cannot be guaranteed although extensions are listed, as it depends on codec, data
bit rate and resolution used (all MPEG codec formats are supported).
- It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver. STRONG
will not take responsibility for any loss of information or circumstances caused by loss of information.
* This user manual describes the full functionality including the recording function and may not be applicable if
thesoftware for recording via USB has not yet been installed (available in our web shop: www.thomsonstb.net).
2.0 YOUR RECEIVER
2.1 DEFAULT PIN: 0000
2.2 Front Panel
Fig.1
1. IR Sensor Receives commands from the remote control
2. LED Display Shows channel number and time in standby
3. Mode IndicatorLED RED indicates that the receiver is in STANDBY mode. GREEN
indicates that the receiver is in OPERATING mode.
4. q Switches the receiver ON or into Standby
5. USB To connect your USB storage device.
2.3 Rear Panel
Fig.2
1. ANT IN To connect to your antenna for reception of broadcast
signals.
2. ETHERNET To connect to your Ethernet cable (RJ-45) for RSS feeds and
weather forecasts
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THT741 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THT741 in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THT741

Thomson THT741 User Manual - German - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info