658786
14
Zoom out
Zoom in
Previous page
1/24
Next page
P10
MAIN MENU
Use pq to select Scan mode, and select between Free which will only install Free-to-Air channels or All.
This means that channels that are Free-to-Air or scrambled will be searched and stored.
Use pq to select Channel No and select the channel number of the frequency you’d like to search. Press
OK to open a list to make selection faster.
The next option Modulation is to select between Only DVB-T or DVB-T+T2 modulation type.
When in doubt, use the DVB-T+T2 setting.
If you use an active antenna (with built-in amplifier), then switch the Antenna Power to On. If you use a
passive antenna (without built-in amplifier), then select Off.
Highlight Search and press OK to start scanning. New found channels will be added to the channel list.
7.1.2 Auto Search
This menu allows you to search for channels from all available Frequencies or Channel numbers. Be aware
that all previous installed channels and favourite list(s) will be deleted. The new found channels will be
installed in the channel list and afterwards you can create a new favourite list if you like.
Select Scan mode, and select between Free which will only install Free-to-Air channels or All. Highlight
Search and press OK to start scanning.
7.1.3 Information
This submenu shows receiver specific information such as hardware and software version. It also displays
technical information from the currently selected channel and signal strength and quality. Please have the
Information screen on hand when you call our hotline. The person who answers your call might ask for the
information given in this screen.
7.1.4 Load Factory Settings
This option allows you to reset the receiver back to the factory settings, which also clears all stored
channels.
Use pq to select Load Factory Settings in the Installation menu and press OK. You are asked to enter
your PIN code. Enter the correct PIN code using the 0~9 buttons. (DEFAULT PIN: 0000). A confirmation
window is displayed. Select OK to load factory settings. Select Cancel to cancel. Press  to leave.
WARNING: By resetting your receiver to factory default, all your settings and stored channels will be
permanently deleted. Please use this option with care.
7.1.5 Freenet Menu
Conditional Access (CA) menu. Read technical data about your subscription(s). Read a message from your
provider and check the rights to watch certain programmes. A Software update is signalled here too.
Follow the instructions on screen. Some data given has no immediate meaning to a client, but is useful to
for example a service centre or provider itself. This menu gives access to the following submenus which
can be opened for detailed information about these items: Service Status, Loader Status, Product Status,
Client Status and Mailbox.
7.1.5.1 Mailbox
This menu allows access to provider mails. It is used for sending important information from broadcaster/
content provider to you. If you receive a mail you will get this message directly displayed on screen. After
the mail has been removed from the screen you can find the messages within the menu and have the
possibility to delete messages individually by pressing the BLUE Delete button or to delete all of them by
pressing the RED Delete ALL button.
7.2 Channels
Use tu to select Channels in the main menu.
Use pq to highlight the submenu of choice and press OK to select.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THT740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THT740 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THT740

Thomson THT740 User Manual - German - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info