658776
25
Zoom out
Zoom in
Previous page
1/28
Next page
English
TROUBLESHOOTING
P21
NOTE It is possible to use USB storage devices already formatted in NTFS.
Press EXIT to leave this menu.
7.5.6 DVR Setting
This menu allows you to configure settings for Timeshift, recording and playback.
Select DVR Setting and press OK to enter.
Use pq to move the highlight and tu to change settings.
Timeshift: Select between Auto, Pause or Off. When Timeshift is set to Auto it will
automatically start every time after zapping to a channel. When Timeshift is
set to Pause it will start only after pressing the YELLOW/2 button. Select Off
to deactivate Timeshift.
Step to: 30 sec to 30 min. Set the time step you like to jump forward to by pressing 4
during playback of recorded files. This only works when the info banner is
displayed on screen. If it is not, press INFO.
Time Shift to Record: If set to On the timeshifted part will be included into your recording when
you start to record the current programme.
PS Record: Select between On or Off. When Off is selected, recordings will also include
subtitles and Teletext (when available). Record to PS mode On allows
recordings without these extras and will need less space on your USB device.
After Recording: Go to Standby-mode or Watch TV. If set to Go to Standby-mode then receiver
will be switched to Stand-by after record by Timer is completed. If set to
Watch TV then receiver would not be switched to stand-by after record by
timer. In this case switching to Stand-by will be done according to “Auto
Standby” settings
Press EXIT to leave this menu.
7.5.7 Remove USB device safely
Select Remove USB device safely from the tools menu and press OK. The receiver will display a
message indicating that you can safely remove your storage device from the receiver.
NOTE After performing this function, the USB device is no longer accessible from your
receiver. To gain access to your storage device again, re-insert it or switch the
receiver to standby and on again.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Check the receiver according
to the procedures shown below. If the receiver does not work properly after checking it, please
contact your dealer or the local Service Hotline. Do NOT try to open or disassemble the receiver. It
may cause a dangerous situation and warranty will be void.
Problem Possible cause What to do
LED indicator not lit Mains lead unplugged Check mains plug
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THT522 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THT522 in the language / languages: English as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THT522

Thomson THT522 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info