658780
12
Zoom out
Zoom in
Previous page
1/28
Next page
8
Scan mode: Select All to store scrambled and free to air channels or select Free
to store only free to air channels. Note: Scrambled channels cannot
be viewed with this receiver.
Connection: Use this option to adjust the established connection to your TV set.
Select HDMI or TV SCART.
*Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then most likely
subtitles can be activated via Teletext if available.
When all settings have been made, move the highlight to OK and press OK to continue.
NOTE: Wrong region selection can lead to missing channels or channels
being stored at wrong positions in the channel list.
The receiver will now advance to the Aerial Adjustment screen.
This part of the wizard is of great help when setting up your antenna system.
Use pq to move the highlight to the setting you wish to alter and use tu to change values.
The following settings are available:
Antenna Power: Set to On if you use an active antenna. When set to On, 5 V will
be present at the ANT IN connector of the receiver. Select O for
passive antennas.
Beeper: Select On for an audible indication of signal reception. O turns the
beeper o.
Channel No.: Select a channel that is known to carry a broadcast in your region.
The Signal Strength and Signal Quality bars give a visual indication
of the reception. Adjust your antenna to obtain maximum signal
strength and quality.
When all settings have been made, press OK to start scanning.
The receiver will search for all available channels now. Once scanning is nished, the receiver
switches to viewing mode.
TIP: If the Welcome menu does not appear after switching on the
receiver the rst time, reset the receiver to factory settings by
pressing the MENU button and selecting Load Factory Setting in
the submenu Tools. (DEFAULT PIN: 1234).
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at STRONG understand that you can’t wait to enjoy your new high denition digital
terrestrial receiver. The following quick guide will make you familiar with the basic operation
of this device. We do, however, advice you to read the full user manual to get the best
performance from your receiver.
To turn your receiver ON or to Standby, use the q button on the remote control.
Choose the desired channel with the pq buttons. Alternatively, you can digit the channel
number with the 0~9 buttons on the remote control or press OK in viewing mode to display
the channel list. The volume can be adjusted with the tu buttons.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THT504 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THT504 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THT504

Thomson THT504 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info