480547
16
Zoom out
Zoom in
Previous page
1/25
Next page
MAIN MENU
P13
English
confirmation window select Yes with tu and press OK to delete or select No
to cancel.
WARNING! The Delete all function will permanently delete all current channels and
all favourite lists from your receiver, and you are not able to leave the
menu until you search for channels again.
7.2 Installation
7.2.1 Auto Scan
Use pq to select Installation and press OK or u to advance.
Select Auto Scan with pq and press OK to enter.
Use tu to toggle between FTA Only Yes or No. When FTA Only is set to Yes,
scrambled channels won’t be stored in the channel list. Use pq to highlight
Search. Now press OK to start auto scan.
The receiver will store all newly found channels in the channel list.
7.2.2 Channel Scan
Use pq to select Installation, press OK or u to advance.
Use pq to select Channel Scan and press OK to enter.
Use tu to toggle between available scan modes: By Channel and
By Frequency.
If By Channel is selected, use the cursor buttons to select Scan Band and Channel
No. If By Frequency is selected, use the cursor buttons to select Frequency
and Bandwidth. Highlight Search and press OK to start scanning. Newly found
channels will be stored in the channel list.
7.2.3 Antenna Adjustment
Use pq to select Installation, press OK or u to advance.
Use pq to select Aerial Adjustment and press OK to enter.
Use pq move the highlight to the setting you wish to alter and use tu to
change values.
The following settings are available:
Antenna Power: Set to On if you use an active antenna. When set
to On, 5 V will be present on the ANT IN connector
of the receiver. Select Off for passive antennas.
Beeper: Select On for an audible indication of signal
reception. Off turns the beeper off.
Channel No.: Select a channel that is known to carry a
broadcast in your region. The Signal Strength and
Signal Quality bars give a visual indication of the
reception. Adjust your antenna to obtain maximum
signal strength and quality.
Press EXIT/SORTIE to leave the Antenna Adjustment screen.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THT501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THT501 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info