480547
10
Zoom out
Zoom in
Previous page
1/25
Next page
STARTING UP FOR THE FIRST TIME
P7
English
With the infrared sensor you can place the receiver out of sight (e.g. a closed
cabinet) while still being able to control it. Plug the infrared sensor into the “IR”
connector on the back of the receiver. Locate the sensor at a position allowing a
direct sight to the remote control. Once a suitable location is found, remove the
protection foil from the adhesive tape on the bottom of the sensor and fix it by
slightly pressing it down on the surface it should be placed on.
4.0 STARTING UP FOR THE FIRST TIME
If you use your receiver for the first time, the Welcome “Easy install” menu appears.
Use pq to move the highlight to the setting you wish to alter and use tu to
change values.
Start by selecting your language using tu. Once you have selected your
language, press q to move to the highlight next item and use tu to change.
Language Select your language.
Region: Select your region where this receiver is used.
Subtitle: Select Normal to display subtitles per default,
Select Hard of Hearing to show HoH subtitles per
default. Select Off to hide subtitles per default.
Aspect Mode: Use this option to select the aspect ratio of your
TV and the preferred conversion method. Options
are: Auto (automatic detection of aspect ratio), 4:3
Panscan (Displays 16:9 widescreen broadcasts
full screen on your 4:3 TV), 4:3 letterbox (black
bars on top and under the picture on a 4:3 TV) and
16:9 (use this setting for 16:9 TV sets).
Scan mode: Select All to store scrambled and free to air
channels or select Free to store only free to air
channels. Note: Scrambled channels you cannot
watch with this receiver.
Connection: Use this option to select the connection to your
TV set. Select HDMI or SCART. If you are using a
cinch cable then this selection is not important.
Once all settings are made, move the highlight to OK and press OK to continue.
NOTE: Wrong region selection can lead to missing channels or channels
being stored on wrong positions in the channel list.
The receiver will now advance to the Aerial Adjustment screen.
This part of the wizard is of great help when setting up your antenna system.
Use pq to move the highlight to the setting you wish to alter and use tu to
change values. The following settings are available:
Antenna Power: Set to On if you use an active antenna. When set
to On, 5 V will be present on the ANT IN connector
of the receiver. Select Off for passive antennas.
Beeper: Select On for an audible indication of signal
reception. Off turns the beeper off.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THT501 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THT501 in the language / languages: English as an attachment in your email.

The manual is 1,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info