480545
11
Zoom out
Zoom in
Previous page
1/19
Next page
P8
MAIN MENU
5.1.3 Delete all Favourites and Groups
Use this menu to delete all favourite channels. Select Delete All Favourites with p/q and
press OK. Use
t/u to select Yes in the confirmation window and press OK to delete or select
No to cancel.
5.1.4 Delete all
Use this option to delete all channels. Select Delete All with p/q and press OK, then enter
the Password (default:0000). In the confirmation window select Yes with
t/u and press OK to
delete or select No to cancel.
5.1.5 Group Rename
In this menu you can change the name of favourite groups. Use p/q to select Group
Rename and press OK to enter.
1. Select a group with
p/q and press OK.
2. Use
p/qt/u to navigate the on screen keyboard. Highlighted characters can be
inserted by pressing OK. After entering the desired group name, highlight OK at the
keyboard and press OK on the remote control to confirm.
3. Press EXIT/SORTIE to leave without saving your changes.
5.2 Installation
5.2.1 Auto Scan
1. Use p/q to select Installation and press OK to enter menu.
2. Use
p/q to select Auto Scan and press OK to enter the menu.
3. Change the Scan Mode with
t/u. Options are: Free for searching Free To Air channels
only or All for all channel search.
4. Use
p/q to highlight Action and select Reinstall to create a new channel list or Update to
update the current channel list with newly found channels.
5. Use
p/q to highlight Search and press OK to start auto scan.
5.2.2 Channel Scan
1. Use p/q to select Installation and press OK to enter the menu.
2. Select Channel Scan with
p/q and press OK to enter.
3. Use
t/u to select the desired Scan Modes – By Channel or By Frequency.
4. When By Channel is selected, use the cursor buttons to select Scan Band and Channel
No. When By Frequency is selected, use the cursor buttons to select Frequency and
Bandwidth. Set Network Search to ON or OFF, highlight Search and press OK to start
scanning. Found channels will be stored and the receiver will switch to the first channel in
the list.
5.2.3 Antenna Setting
1. Press MENU to enter main menu.
2. Use
p/q to select Installation and press OK to enter the menu.
3. Select Antenna setting with
p/q and press OK to enter.
4. Use
t/u to change the setting. If On is selected, the receiver will provide 5V antenna
power on the antenna input (for active antennas).
5. Press EXIT/SORTIE to exit.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THT101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THT101 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info