658789
25
Zoom out
Zoom in
Previous page
1/30
Next page
English
21
Symptom Cause Remedy
Incorrect values of some tuner
parameters (e.g. one/some
channel(s) changed to another TP).
Set the values of tuner parameters
correctly in menu Installation >
Channel Search. Helpful websites are:
http://de.kingofsat.net/
http://www.lyngsat.com/
Wrong direction of the antenna. Check the signal with a spectrum
analyzer and adjust your antenna
correctly.
No access to
scrambled services
Expired subscription.
Smart card awaiting new
authorisation.
No subscription for the selected
channel.
Check your current subscription
status in Conditional Access > Irdeto
CA System > Product List Status
together with your service provider.
When receiver was powered off/
disconnected from signal for longer
it can take ~1-2h until a valid card is
activated again.
Switch to another channel.
The remote control
does not work
The batteries of the remote control
are not inserted, wrongly inserted or
exhausted.
Check whether the batteries are
inserted correctly or exhausted, if so
replace the batteries in the remote
control.
The USB storage
device is not
working properly.
Formatted incorrectly.
Bigger sized HDD connected.
USB 1.1/3.0 device connected.
Format USB device by PC to FAT 32.
Bigger size HDD or HDDs with more
partitions might need longer time to
be detected.
The receiver might not work properly
with such an USB device respectively
functionality with all available USB
devices can't be guaranteed.
The receiver
switches to Standby
automatically.
Auto Standby function is activated
and reached the adjusted time
(default 3h).
In the menu Settings >System
Settings you can adjust the Auto
Standby time or disable it.
NOTE: For questions concerning AustriaSAT or HD Austria, please contact
the service telephone: 0820 90 90 93 or visit www.austriasat.at or
www.hdaustria.at.
A.2 TECHNICAL SPECIFICATIONS
Demodulator
Demodulation: QPSK, 8PSK, 16APSK (MSB1245 demodulator Chipset)
Input symbol rate: 1 ~ 45 MBaud for DVB-S/S2
Inner code rate 1/2, 2/3, 3/4, 5/6, 7/8
QPSK: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
8PSK: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
Video Decoder
Prole level: MPEG-2, MPEG-4 H.264/AVC
Aspect ratio: 4:3 and 16:9, Pan & Scan, Letterbox, Full screen combined
Frame rate: PAL and NTSC
Video output: Scart: 576i, CVBS with CGMS-A
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS814 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS814 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS814

Thomson THS814 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info