658789
21
Zoom out
Zoom in
Previous page
1/30
Next page
English
17
Recent channel list
Here, you can set the function of the 9 button, factory-set On, which allows you to
open the Recently Viewed Channels list using 9 in TV mode to access up to 30 of
the most recently viewed channels receive. If you set O, the button will only change
between the 2 most recently viewed channels.
Deep Standby After:
This function switches the receiver to the power save mode (Deep Sleep) after
switching it off into the standby mode within the set time. Available settings are: 5
minutes, 15 minutes, 30 minutes, 1 hour, 3 hours, and O. The receiver consumes
less power than in standby mode. To power up from deep sleep mode, it takes about
45 seconds.
Auto Standby: This function allows you to set the hours after which the receiver should
automatically switch to standby mode. Available settings are: 1 hour, 2 hours, 3
hours, 4 hours, 5 hours, 6 hours, and O. If the receiver has not been operated
during the set time, it automatically switches to standby mode. This is an additional
way to reduce power consumption.
7.3.3 Time Settings
In this menu, you can adjust settings for the time and date
Time Settings: Select Auto to automatically synchronize the time and time zone, or Manual to set
the time manually.
Timezone: The time zone can be adjusted in manual Time Settings.
Summer Time: This setting is only available when you set the time to Manual.
When the winter time is changing to Summer Time, it is necessary to switch
Summer Time to ON.
7.3.4 Timer
Use the timer function to switch to a selected programme. Press OK to open a timer.
Timer Mode: Use t u to select Once, {Monday-Friday, Daily, Weekly or Monthly, factory setting
is set to O.
Timer Action: Switch On is set here to switch the receiver on at the desired time.
Channel: Press OK to open the channel list and press pq or P +/- to select the desired
channel and press OK to accept.
Start Date: Enter the selected date with 0 ~ 9.
Start Time: Enter the selected starting time with 0 ~ 9.
End Time: Enter the selected end of the recording with 0 ~ 9.
Standby after timer:
Set here whether the receiver should always be in standby after the timer has expired
or whether it should always remain switched on.
After nishing all settings, press pq to select Save and press OK.
NOTE: The setting for Standby after timer applies to all timers.
7.3.5 Receiver Information
The menu contains information about the hardware and software versions of the receiver.
Amongst others you will nd the serial number, model name, loader version and the CSSN number
of the receiver, which is also required for the registration and payment of pay TV channels. The CSSN
number can also be found on the bottom of the receiver or on the packaging. If you need to contact
our support, please keep this information as it can help you process your request.
7.4 Multimedia
In this menu you can decide whether to play movies, music or look at pictures.
Use the pq buttons to select the appropriate menu, and then press ОK to switch to one of the
submenus. In all multimedia menus, you can use the multimedia buttons as usual.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS814 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS814 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS814

Thomson THS814 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info