658794
26
Zoom out
Zoom in
Previous page
1/30
Next page
P26
TROUBLESHOOTING
NOTE: 5 min after switching the receiver to standby it enters the deep sleep mode. In this time the receiver is
able to start up quickly. Starting up from deep sleep takes approx. 1 min.
7.5.2 Set Timer
Timers can be used to schedule recordings or to switch to a certain channel at a specific time. It will help you
not to miss your favourite events. Above the settings you will see the current date and timer displayed.
Timer Number Use tu to select one of the ten available timers or press OK to list up.
Channel With OK you can list the channel list in a new screen. Use pq or P+/P to select a
channel and press OK again to apply this channel.
Timer Type: Choose between Once, Daily or Weekly.
Event Type: Choose between Record or Turn ON.
Month: Only available when Timer Type is Once. Use tu to select the month.
Date: Only available when Timer Type is Once. Use tu to select the date.
Day: Only available when Timer Type is Weekly. Use tu to select the day.
Time: Use the 0~9 buttons to enter the time at which the timer should start.
Duration: Use the 0~9 buttons to digit the duration of the timer. For duration of 45 min, just
enter 45 and press OK or for 1h 30min, just enter 130 and press OK.
Enable: Choose between Yes or No. You have to choose Yes if you want the timer to start at the
set time.
By pressing the YELLOW Summary button you can check the set timers. Press the RED button to edit a set timer.
Then you can choose between Record and Turn ON by using the tu buttons. Enter the time with the 0 ~ 9
buttons if you want to change it. Select OK to change the timer or Cancel to cancel it. The BLUE button can be
used to delete a timer and with the YELLOW button or
you can close this menu again. Timers set Enable to
Yes are automatically available in the Summary. When all settings have been made, press to leave the menu.
When returning to viewing mode the receiver will inform with a message that it saves your settings.
NOTE: If one timer is in conflict with another or if the set time already has passed, the receiver will display a
warning and ask how to solve the conflict.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Please check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact your local
service line or THOMSON dealer. Alternatively you can send a support mail via our website:
www.thomsonstb.net. NEVER open or disassemble your receiver. This may cause a dangerous situation and will
void the warranty.
Symptom Cause Remedy
The status LED on
the front panel
does not light up.
The power adapter is not plugged
in or the power is switched OFF.
Check that the power adapter is plugged
into the wall outlet. Make sure that the power
switch on the rear panel is in ON position.
No picture
No sound
No menu
Wrong input selected/ bad
connection or cable. Connectors
are not fully inserted.
Check that the correct TV input is selected.
HDMI inputs for most TV screens are not
automatically switched to the correct HDMI
input.
Make sure the connectors are properly
connected to the TV and receiver.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS813 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS813 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info