658794
7
Zoom out
Zoom in
Previous page
1/30
Next page
YOUR RECEIVER
P7
WARNING Indicates warning information.
NOTE Indicates any other additional important or helpful information.
MENU Represents a button on the remote control or the receiver.
(Bold characters)
Move to Represents a menu item within a screen.
(Italic characters)
1.4 Accessories
1x Quick Installation Guide
1x remote control unit
2x batteries (AAA type)
1x adapter 12 Volt DC, 2 Ampere
WARNING: The batteries should not be recharged, disassembled, electrically short-circuited, be mixed or used
with other types of batteries. If rechargeable accumulators instead of batteries are going to be used,
we recommend using (e.g. NiMH) types with low self-discharge to ensure long time operation of
remote control.
1.5 Usage of external USB devices
It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB 2.0 specifications,
recording, Timeshift and playback with your receiver might not work properly.
If you are going to use external USB HDD (Hard Disk Drive) please consider that it might be the case that the
power specifications exceed the supported output of your receiver (5V/1A). If so, please connect your USB HDD
to an according external power adapter.
THOMSON cannot guarantee compatibility with all types of USB storage devices.
It is advised not to store important information on USB storage devices used with the receiver. Always
make backups of data on your USB storage device before using it with this receiver. THOMSON will not take
responsibility for any loss of information or circumstances caused by loss of information.
Please ensure that either the USB device is already formatted to FAT32, or format the USB device via your
receiver, refer to chapter 7.4.4 HDD Manager in the user manual available on our website www.thomsonstb.
net/downloads/manuals/THS813_UM_EN.pdf for details.
THOMSON cannot guarantee the playback of all files although extensions are listed, as it depends on file size,
codec, bit rate and resolution.
2.0 YOUR RECEIVER
2.1 DEFAULT PIN-CODE: 0000
2.2 Front Panel
Fig.1
1. Standby/ON button Switches the receiver ON or into Standby
2. IR Sensor Receives the RCU commands
3. Indicator LED GREEN indicates that the receiver is currently ON, GREEN and RED alternating indicates
that the receiver is preparing to enter deep sleep, RED indicates that the receiver is
currently in deep sleep mode.
4. LED Display Displays channel number, time, videotext page or PVR modes
5. Smart card slot To insert your valid and activated Irdeto smart card for proper reception of your desired
channel bouquet. For the correct insertion of smart card please see the insertion
drawing (fig 1).
6. USB To connect your USB storage device
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS813 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS813 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info