658774
12
Zoom out
Zoom in
Previous page
1/34
Next page
P8
FIRST TIME INSTALLATION
3.3 Connecting multiple fixed LNBs using a DiSEqC
1.0/1.1 switch
Fig. 8
1. Connect the LNBs of your fixed antenna to the inputs of a DiSEqC 1.0/1.1 switch
2. Connect the output or “to receiver” connector of the DiSEqC 1.0/1.1 switch to the SAT IN
connector on your receiver.
3. Refer to section 3.1 or 3.2 for TV and mains connections.
4. Refer to section 7.1.1 for Satellite Settings
3.4 Connecting to Ethernet
Fig.8
Connect a CAT5E cable (or higher quality) to the RJ45 connector of the unit and the other end
to an existing switch, router or modem. The default setting is Auto (DHCP) for automatically
obtaining IPs and DNS. Select Manual in Menu - Network - Network Settings to enter own settings if
required. When setting up manually, you need to provide a unique IP address, Netmask, Gateway
and DNS for your receiver. Refer to the manual of your router or modem to setup properly. The
Ping test can be selected to check your connecting, once setup correctly.
4.0 FIRST TIME INSTALLATION
After all connections have been made properly, switch on your TV and make sure the receiver is
connected to the main power. If you are using the receiver for the rst time or restored to factory
default, the Installation menu will appear on your TV screen. Press the tu buttons to select the
OSD Language of your preference.
Country Select your country.
Pre-installed List Some countries come with a pre-installed channel list.
If not available for your country, the item is not selectable.
Video Output Select the output you prefer to use.
TV Format Select between 16:9FIT. 16:9LB and 4:3LB or 4:3PS
Start Search If the pre-installed list is selected, the receiver will jump to the first channel
in the list. If no pre-installed list available, the Satellite Setting page will
appear.
NOTE: If Germany is selected as country, a German pre-set channels list from ASTRA
19.2E will be installed. The pre-installed list will work with a single Universal
LNB (LO 9750/10600). If another type of LNB is used, you need to setup the
LNB in the Installation menu, Satellite Setting.
You can continue with the Installation menu to scan and install further channels as described
below or go to viewing mode by pressing the EXIT button to start enjoying the pre-installed
channels immediately.
12


Need help? Post your question in this forum.

Forumrules
1

Forum

thomson-ths221

Reset search

  • What is the 3 digit Code to use in a Universal Remote Control for a Thomson THS221 Satellite Receiver? Submitted on 18-9-2022 at 11:22

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS221 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS221

Thomson THS221 User Manual - German - 40 pages

Thomson THS221 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info