699738
24
Zoom out
Zoom in
Previous page
1/35
Next page
20
Satellite Name: Press OK to enter text input mode. In the key table select a
character by using the navigation buttons. Press OK to enter the
chosen character. When you have entered the name, navigate to
the “OK” button on screen and press OK on the remote control to
conrm the new name. Save the settings with OK or cancel by .
Edit satellites: Press GREEN to edit the focused satellite. For changing settings see
explanation above. Conrm changes with OK or cancel by .
Delete satellite: Press YELLOW to delete the focused satellite. Press OK to conrm
deleting or to cancel.
7.3.1.6 Transponder Edit options
Note: Transponders can only be edited when the transponder list is on
screen. To do this, select the satellite you want to edit and press 4
to open the TP list. The options below are now available.
Add transponder: Press RED to add a new transponder. In the pop-up banner, enter
the transponder´s data by using the p/q tu and 0 ~ 9 buttons.
Conrm the settings with OK or cancel with . An existing TP
cannot be stored again under the same satellite.
Edit transponder: Press GREEN to edit the highlighted transponder. In the pop-up
banner, change the transponder´s data by using the navigation and
numeric buttons. Conrm changes with OK or cancel with .
Delete transponder: Press YELLOW to delete the highlighted transponder. Press OK to
conrm or to cancel.
7.3.2 DB Management
This menu allows you to save and reload the channel Data Base of your receiver from/to a USB-
device. This very convenient feature enables you to save your personal settings like Channel-,
Favourite-, Sat- and TP-lists on an USB storage device and load them back to the receiver later.
This feature is especially helpful after unintentional changes or factory reset. In such cases just
skip the First Installation by pressing in Installation guide and select the DB management
menu. Connect the USB storage device to you receiver and select one of the options:
7.3.2.1 Load from USB
Press OK for displaying the list with available DB les (if any stored before).
The DB les „HB_DATABASE_DDMM.DBM” are shown with their built date (day and month).
Select the DB le you want to load and conrm it with OK. When the DB has been successfully
loaded (message appears on screen) the receiver will switch automatically to the rst stored
channel and show its content in the background. Press until the OSD menu disappears.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS210 in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THS210

Thomson THS210 User Manual - German - 42 pages

Thomson THS210 User Manual - French - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info