658771
21
Zoom out
Zoom in
Previous page
1/32
Next page
CONTROL PANEL
P17
English
9.8.8 PIDs
Use this option to set the PIDs between automatic and manual. If you choose manual, you can set the
individual audio and video PIDs and the PCR.
9.8.9 Video PID
Use this option to manually set the video PID.
9.8.10 Audio PID
Use this option to manually set the audio PID.
9.8.11 PCR PID
Use this option to manually set the PCR PID.
9.8.12 Channels
Select All to search for all Free-to-Air and encrypted channels.
Select Free-to-air to search only for Free-to-air channels.
Select HD+ to search only for HD+ channels.
9.8.13 DVB-S2
Define whether searching shall cover DVB-S2 transponders as well.
9.8.14 Finding and storing the channels
Once the options are set, press the GREEN button on the remote control to start the channel search. Once
a channel search is started, a progress bar and list of channels found will be displayed. At any time, you
may stop the search by pressing Exit on the remote control. After the channel search is complete, press
the GREEN function button on the remote control to save the channel list and exit.
9.9 Factory Settings
Use this option to reset the receiver to default settings. This may be necessary when a large number of
settings have accidentally been made incorrectly. The access to factory defaults is protected by a PIN code
(0000 by default).
9.9.1 Factory Defaults
Press the OK button and confirm with the GREEN function button, if you want to reset the unit to the
Factory default settings.
NOTE: Using this option will delete all data stored in the channel lists and favourite lists.
After this, the Installation Wizard will be open. Please refer to the Installation Wizard section of this user
manual for further information.
9.9.2 Preprogrammed Channel Lists
Use this option to reset your TV channel lists to the receiver’s preprogrammed default programme lists or
to download an updated channel list over the Internet.
9.10 System Update
This option supports three ways to update the software of the receiver: over the antenna (OTA), through
the USB port or over the Internet. When this option is executed, the receiver will automatically search for
new software version at three sources in the following order - (a) on a USB disk, (b) over the Internet and
(c) over the satellite. As soon as the receiver identifies the first source containing a newer software version,
the receiver will reboot into a software download mode and will start downloading the new software from
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS 845 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS 845 in the language / languages: English as an attachment in your email.

The manual is 2,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info