480543
22
Zoom out
Zoom in
Previous page
1/31
Next page
MAIN MENU
P17
English
After all settings are adjusted following to your preference, choose Save with pq and press
OK. The receiver returns to the menu.
NOTE: DVB subtitles on Astra 19.2 are available for example on following channels: Das Erste HD,
ZDF HD, 3sat HD, arte HD and TV5MONDE EUROPE (range continually expanding). Is the Subtitle Setting
set to ON, subtitles will be displayed automatically if available for this channel or movie. When the setting is
OFF the DVB subtitles can be temporary opened by pressing SUB.
7.1.4 Parental Lock
This menu enables you to define and edit your PIN code, set Installation or Parental Lock.
Choose the desired setting with
pq and press OK to list the possibilities up or use tu to
change the value of the highlighted setting.
Please also carefully read the displayed instructions for each screen which will help you adjust
the settings correct and easily.
Current PIN Code: Use the 0~9 buttons to access this menu options below. Enter the
(DEFAULT PIN: 0000) in case you have not changed previously.
Parental Lock: Use
tu to select ON or OFF. Parental Lock allows you to prevent
children from watching adult channels in case these channels
support EPG respectively submit EPG based parental rate for your
country. In below adjust the Parental Rate accordingly.
Installation Lock: Use
tu to select ON or OFF. Installation Lock allows you to lock
the access to your Installation settings and channel edit menus.
Parental Rate: Use
tu to change these settings. Following rates are available:
Unblocked, 12+, 16+, 18+ or All Blocked. Depending on the
adjusted setting you will have to enter your PIN code when
switching through channels which support EPG respectively
submit EPG based parental rate.
New PIN Code: Use the 0~9 buttons to enter your desired PIN Code.
Confirm PIN Code: Use the 0~9 buttons to confirm your new entered PIN code.
Once all settings are made, press EXIT/SORTIE to leave the Parental Lock menu. When
returning to viewing mode the receiver will inform with a message that it saves your settings.
NOTE: If you are using the Parental Lock function NOT set to Unblocked then all FTA channels
which support EPG respectively submit EPG based parental rate will require to enter your PIN Code
(DEFAULT PIN: 0000).
7.1.5 Factory Reset
A factory reset will restore your receiver to the factory default settings. It will delete all settings
and channels. To reset the receiver, you have to enter your PIN code (DEFAULT PIN: 0000),
then use
pq to select OK to execute or Cancel to return to the menu. Afterwards the receiver
will restart with the First Time Installation.
WARNING: A factory reset will permanently delete all your personal settings, timers and stored channels.
Please consider this before you perform a factory reset. In case you want to backup your settings before,
please refer to chapter 7.2.2 Backup to USB device!
7.2 Update & Info
This menu allows you to check information about your current Software, create a backup
of your channels, load a backup into the receiver and update the receiver via USB or OTA
(download via satellite). It consists of the following sub-menus: Receiver Information, Backup to
USB device, Load Backup from USB device, USB Update and OTA Software Update. Choose
the desired sub menu with
pq and press OK to advance. For Backup to USB device and
Load Backup from USB device these functions will be executed by pressing OK directly.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS 810 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info