480543
14
Zoom out
Zoom in
Previous page
1/31
Next page
QUICK GUIDE TO USING YOUR RECEIVER
P9
English
4.5 Scan Options
In this menu you can use pq to highlight the desired item and tu to change settings. Press
OK to choose the desired item from the list.
Please carefully read the displayed instructions for each screen which will help you adjusting the
settings correct and easily.
Satellite: Here you can check the available satellites which previously have
been setup.
Scan Mode: Here you can select which channels you wish to scan for: FTA & $
(all), FTA (only free to air) or CA (only scrambled).
Channel Type: Here you can decide if you want to search for TV & Radio, TV or
Radio channels only.
LCN: Here you can select ON if you want to scan with LCN mode or
OFF if you don’t like to.
NIT Search: Here you can select ON if you want to scan for new appeared
channels or OFF if you don’t like to.
NOTE: We only recommend switching the LCN (Logical Channel Numbering) setting to ON, if you
want to load the Austrian broadcaster’s defined LCN list into your receiver.
NIT (Network Identification Table):
This option will scan on the NIT table of the appropriate satellite
and allows you to receive new appeared channels. Please
consider that unlike Astra 19.2 und HOT BIRD 13° some satellites
do not offer this function. Please check with your local dealer.
After everything is setup following to your preference, choose Search 1 Sat or Search all Sat
with
tu (depending on the availability and previous adjustments) and press OK there. The
receiver will perform the chosen scan process. Afterwards all found channels will be stored and
the receiver will switch to the first found channel respectively the first channel of the preset list
(depending on how it was setup).
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at THOMSON understand that you can’t wait to enjoy your new HD receiver. The following
quick guide will make you familiar with the basic operation of this device. We do, however,
advice you to read the full manual to get the best performance from your THOMSON HD
receiver.
To turn your receiver ON or to Standby, use the q button on the remote control or the button
on the left side of the front panel.
Choose the desired channel with the
pq buttons or the P+/P- buttons. Alternatively, you can
digit the channel number with the 0~9 buttons on the remote control or press OK in viewing
mode to display the channel list.
The volume can be adjusted with the V+/V- buttons. The usage of V+/V- and ! is possible in
ALL menus which present TV picture in background and can additionally be used in videotext
mode. In viewing mode you can also use the
tu buttons.
The PG+/PG- enable you to scroll page wise in all list modes to make your channel or other
selection as comfortable as possible.
NOTE: 5 min after switching the receiver to Standby it will enter the deep sleep mode. Within this
time the receiver is able to start up quickly. Starting up from deep sleep takes approx. 1 min.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THS 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THS 810 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info