699584
19
Zoom out
Zoom in
Previous page
1/24
Next page
English
15
Timer Service: Choose between Channel (the timer will wake the receiver up) or Record
(Timer will start recording the scheduled event).
Wakeup Channel: Use t u or OK to call up channel list, therein use pq or P+/P- and press
OK again to select the channel the timer should switch to or record on.
Wakeup Date: Use the 0~9 buttons to enter the desired date.
On time: Use the 0~9 buttons to enter the start-up time.
Duration: Use the 0~9 buttons to enter the duration of the timer.
When all settings have been made, use pq to highlight Save and press OK to conrm. To quit the
timer without saving your settings, highlight Cancel.
7.3.5 Parental Lock
This menu allows you to protect the installation menu and/or channels with a PIN code. You can also
enter a new PIN code in the Parental Lock menu.
Use p/q to select Parental Lock from the System Setup menu and press OK to proceed. You will be
asked to enter your PIN code. (DEFAULT PIN: 1234)
Menu Lock: Locks the installation menu. You can set Menu Lock to On or O.
Parental Rating: Choose between: O, 10 years and up to 18 years. Channels with a
parental rating above the chosen age will be protected with a PIN code (if
rating is available in your local broadcast).
New Password: Enter your new PIN code (4 digits) here.
Conrm Password: Re-enter your PIN code here to conrm.
7.3.6 OSD Setting
This menu allows you to change settings for: OSD Timeout and OSD Transparency.
OSD Timeout: Sets the duration time of on screen banners and messages remove. The
range is 1~10 seconds or Always On.
OSD Transparency: To set the OSD transparency from O ~ 40% with 10% steps.
7.3.7 Audio Description
Audio Description is a service, which some broadcasters are supporting to describe the content on
screen for the visually impaired people. Select AD Service On and Use AD as default also On to
activate the service. With AD Volume Oset the level of the AD text can be adjusted.
Note: Availability of Audio Description depends on the broadcast.
7.3.8 Auto Standby
Auto Standby is a great function to help you reducing power consumption. When set to 3, 4 or 5
hours, the receiver will switch to standby if it doesn't receive any commands during this time. Set Auto
Standby to O to deactivate the automatic standby function.
Default is 3 hours.
7.4 Tools
Press MENU in viewing mode to enter the Main Menu.
Select the Tools submenu with p/q and press OK or u to enter.
Use p/q to highlight the submenu of choice and press OK proceed.
Press to leave.
7.4.1 Information
This submenu shows receiver specic information such as hardware version and software version.
Please open the Information screen when you call our hotline. The person who answers your call
might ask for the information given in this screen.
7.4.2 Load Factory Settings
This option allows you to reset the receiver to factory settings, which clear all stored channels.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THC301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THC301 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THC301

Thomson THC301 User Manual - German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info