699584
12
Zoom out
Zoom in
Previous page
1/24
Next page
8
Provider: Select the “Provider” (Broadcaster, cable network) of your local cable system.
If unknown, select other. In the main menu Installation, you can nd more
options for different scan types.
After all settings are made, move the highlight to Search and press OK to continue.
The channel scan will be started now. This may take some time and after it is nished a message will
be shown, please press OK to complete the rst time installation.
Note: Wrong region or provider selection can lead to missing channels
or channels being stored at wrong positions in the channel list. The
channel scan can be stopped anytime by pressing . In the main menu
Installation, you can nd more options for different scan types.
For more details see chapter 4.1 DVB-C Installation.
TIP: If the Welcome menu does not appear after switching the receiver ON
for the rst time, reset the receiver to factory settings by pressing the
MENU button and selecting Load Factory Setting in the submenu Tools.
(DEFAULT PIN: 1234).
4.1 DVB-C Installation
Select Installation and press OK to enter the installation menu. Press pq t u to select Channel
Scan or Auto Scan. Strength and Quality bars are available in each submenu, to provide information
about signal presence. Network ID (NID) and other technical data can be found on the website of
your “Provider” (Broadcaster, cable network/your local cable system) usually.
4.1.1 Channel Scan
Select Channel Scan and press OK to enter the Channel Scan menu. Press pq t u to set Scan
mode, Channel No., Frequency, Symbol Rate, Scan QAM and Network Search. Highlight Search and
press OK to start the channel scan. If you are missing channels, we recommend obtaining technical
data about the cable operator's base channel and start a Network search from there to nd all
channels belonging to the network.
4.1.2 Auto Scan
Select Auto Scan and press OK to enter the Auto Scan menu. Press p/q tu to set Country and
Network and then highlight Search. Press OK to start the auto search.
Some operators in Germany are pre-installed.
4.1.3 Network ID scan
Select Network ID scan and press OK to enter the menu. Press pq t u to set Frequency, Symbol
Rate, Scan QAM and Network ID. Network ID (NID) and other technical data can be found on
the website of your “Provider” (Broadcaster, cable network/your local cable system) usually. Start a
Network search from there to nd all channels belonging to the network. Highlight Search and press
OK to start the channel scan.
4.1.4 LCN
If {LCN} (Logical Channel Numbering) is activated and supported by the operator, channels will be
stored in the desired & dened order of this operator. Set LCN to On to activate the function or O
to store channels in the found order. This function only applies to a new channel scan and will only be
valid at Channel Scan and Auto Scan options.
4.1.5 Free/All channels
If Free/All channels is set to Free, only channels will be stored that are signalled as Free-to-Air. Set to
All to store all found channels. This function only applies when a new channel scan is performed and
only to Channel Scan and Auto Scan options. Note: Scrambled channels can't be opened/watched
with this receiver.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson THC301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson THC301 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson THC301

Thomson THC301 User Manual - German - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info