548800
176
Zoom out
Zoom in
Previous page
1/208
Next page
166
E-DOC-CTC-20051017-0151 v1.0
Chapter 5
Expert Configuration
Enable/disable the
wireless interface
To disable your wireless interface:
1 Clear wireless interface enabled.
2 Click Apply to immediately apply your changes.
To enable the wireless interface:
1 Select Wireless interface enabled.
2 Click Apply to immediately apply your changes.
Security The security configuration tab allows you to configure the SpeedTouch™:
Security Mode settings.
Access Control settings.
Security Mode Three security levels are available for protecting the SpeedTouch™ wireless
network environment.
level 0:
No security, i.e. the data will not be encrypted, no authentication process will
be used.
level 1:
Backwards compatible security with any Wi-Fi certified client(WEP), i.e.
encrypting the traffic between the SpeedTouch™ and the clients by sharing a
pre-defined 64-bit or 128-bit Network key.
level 2:
WPA-PSK is the highest form of security available for home users but make
sure that your wireless client and client manager are compatible with it.
level 3:
WPA is the highest form of security available but make sure that your wireless
client and client manager are compatible with it. If you want to use this level of
encryption you must have a RADIUS (Remote Authentication Dial-in User
Service) server installed on your network.
By default the SpeedTouch™ access point uses security level 0, implying that no
encryption is used for wireless networking. In case security level 1 or 2 is active,
select Security Level 0 - no encryption to return to security level 0. Selecting this
security level has immediate effect. Data will no longer be encrypted. Therefore, to
re-access the wireless environment of the SpeedTouch™ you must first disable
security on your wireless client.
!
All your wireless clients will be disconnected!
You can also disable your wireless interface by pressing the front panel
button for 10 seconds. When the WLAN led is extinguished, the interface is
disabled.
You can also enable your wireless interface by pressing the front panel
button for 10 seconds until the WLAN led starts flashing.
176


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson Speedtouch ST608 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson Speedtouch ST608 in the language / languages: English as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson Speedtouch ST608

Thomson Speedtouch ST608 Installation Guide - Dutch - 48 pages

Thomson Speedtouch ST608 Usermanual and installation guide - Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info