548793
94
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 7
Advanced Configuration
E-DOC-CTC-20041126-0014 v3.0
92
7.1 Setting up a Virtual Server
Introduction Using Network Address Translation (NAT), the SpeedTouch™ is able to make your
local network act as a single machine to the Internet. This enables you to divide the
services of your server over different host computers.
When the SpeedTouch™ receives an incoming IP packet requesting access to your
local server, the SpeedTouch™ will recognise the service type according to the port
number in this packet (for example, port 80 indicates HTTP service and port 21
indicates FTP service). By specifying the port number, the SpeedTouch™ is able to
forward this service to the correct local IP.
Example configuration In the example below, both Internet users are connecting to the same IP address,
but using different protocols. To access:
The virtual web server they have to enter http://203.70.212.52.
The virtual FTP server they have to enter ftp://203.70.212.52.
WAN IP address To Internet users, all your virtual servers have the same IP Address. This IP Address
is allocated by your ISP. This address should be static, rather than dynamic, to make
it easier for Internet users to connect to your Servers.
Internet
DSL PPP WLANEthernet
VoIPReady
PhoneUSBPWR
1432
Web Server
IP address: 192.168.1.10
FTP Server
IP address: 192.168.1.20
http://203.70.212.52
Remote PC using web server
ftp://203.70.212.52
Remote PC using FTP Server
WAN IP address: 203.70.212.52
You can also use Dynamic DNS feature to allow users to connect to your
virtual servers by using a URL, instead of an IP address.
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson SpeedTouch 716 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson SpeedTouch 716 in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info