548793

Thomson SpeedTouch 716 Manual

33
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 2
SpeedTouch™ Local Networking Setup
E-DOC-CTC-20041126-0014 v3.0
31
2.4.5 802.1x
Definition When a wireless client requests access to a network, it is required to be
authenticated by a central authentication server (RADIUS Server). Only an
authenticated user can access the wireless network.
RADIUS Server Remote Authentication Dial-in User Service (RADIUS) is a protocol for carrying
authentication, authorization, and configuration information between a Network
Access Server which desires to authenticate its links and a shared Authentication
Server.
Components Following components are needed to establish an 802.1x environment in your
network.:
Windows 2000 Server: RADIUS server is installed using “Internet
Authentication Service” and Certificate Services is installed
AP (Router): It should be connected to Windows 2000 Advanced Server
through the LAN port. The DHCP server for the router is used and 802.1x must
be enabled.
802.1x client: A WLAN card supporting WEP.
Configuring 802.1x on
the SpeedTouch™
Proceed as follows:
1 Open the SpeedTouch™ web pages.
2 Browse to Wireless > Security.
3 In the Wi-Fi Protected Access list, click 802.1x.
4 Following fields appear:
RADIUS Server IP Address:
The IP Address of the RADIUS Server.
RADIUS UDP Port:
Except for the IP address of the RADIUS Server, you have to enter the
port number for the server. Port 1812 is the reserved RADIUS-
authentication port described in RFC2138. Earlier AP (RADIUS clients)
use port 1945. The default value will be shown on this box. You can keep
and use it.
RADIUS Shared Secret:
A share secret is like a password, which is used between RADIUS Server
and the specific AP (RADIUS client) to verify identity. Both RADIUS
Server and the AP (RADIUS client) must be use the same shared secret
for successful communication to occur. Enter the words for the share
secret.
5 Enter your settings.
6 Click Apply.
For more information, see “5.1 Accessing the SpeedTouch™ Web
Pages” on page 44.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson SpeedTouch 716 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson SpeedTouch 716 in the language / languages: English as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info