548784
33
Zoom out
Zoom in
Previous page
1/42
Next page
Chapter 4
Internet Connection Troubleshooting
27
E-DOC-CTC-20051017-0035 v1.0
4.2 LED Diagnostics
Checking the LEDs After establishing a connection with the Internet, at least the following LEDs should
solidly light green: Power, DSL, Internet.
LED status Possible solutions
No LEDs are lit The SpeedTouch™ is not turned on, or turned off.
Make sure the SpeedTouch™ is plugged into an
electrical outlet.
Make sure you are using the correct power supply for
your SpeedTouch™. The SpeedTouch™ electrical
power requirements are indicated on the label on the
bottom of your SpeedTouch™.
Make sure the SpeedTouch™ is turned on.
Unplug the SpeedTouch™, restart your computer and
then plug the SpeedTouch™ back in.
Power LED is lit
red or flashing
amber
The SpeedTouch™ is malfunctioning or not able to start
up.
Fully unplug the SpeedTouch™ from your computer
and disconnect it from its power supply. Wait five
seconds, connect the SpeedTouch™ again and turn it
back on.
Run the SpeedTouch™ Upgrade Wizard on the CD
Menu to restore the system software.
DSL LED is
flashing green or
no DSL LED
Your DSL service is unable to synchronise.
Make sure the SpeedTouch™ is plugged into the DSL-
enabled phone line.
Make sure micro-filters are correctly fitted (if not, it is
very likely that your regular telephone service is not
working properly).
Make sure you have the correct SpeedTouch™
variant (ISDN or POTS) according the DSL/phone
service provided to your premises.
If you have previously had a working connection, call
your ISP to check for service outages.
No Ethernet LED No Ethernet connectivity:
Make sure the Ethernet cable(s) are firmly connected
to the 10/100Base-T port.
Make sure you are using the correct cable type for
your Ethernet equipment.
Make sure the Ethernet NIC driver is correctly installed
and enabled on your computer. Power safe options for
the Ethernet NIC should preferably be disabled.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson SpeedTouch 516 v6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson SpeedTouch 516 v6 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson SpeedTouch 516 v6

Thomson SpeedTouch 516 v6 Installation Guide - English - 706 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info