687733
61
Zoom out
Zoom in
Previous page
1/64
Next page
- NL 6 -
Het alarm instellen
Het systeem moet in stand-by staan om het alarm te kunnen instellen.
1. De alarm instelmodus activeren: Druk en houd “PRE. - / ALARM 1” knop 3 seconden ingedrukt.
De cijfers voor de uurweergave knipperen op het scherm.
2. Druk op “SKIP+” of “SKIP-” om het uur in te stellen. Druk op de “PRE. -/ ALARM 1” knop om te
bevestigen. De minutenindicator begint te knipperen.
3. Druk op “SKIP+” of “SKIP-” om de minuten in te stellen. Druk op de “PRE. -/ ALARM 1” knop om
te bevestigen. De alarmmodus knippert.
4. Druk op “SKIP+” of “SKIP-” om een van de volgende modi te kiezen: BUZZ / RADIO. Druk op de
“PRE. -/ ALARM 1” knop om te bevestigen.
Om de tweede alarmtijd in te stellen, herhaal bovenstaande stappen maar gebruik nu de “PRE. +/
ALARM 2” knop
Eenmaal het alarm is ingesteld, wordt er een alarmsymbool op het scherm weergegeven.
Sluimerfunctie
Druk op de “SNOOZE” knop om het alarmgeluid enkele minuten te onderbreken. Het alarm gaat na
circa 9 minuten opnieuw af.
Het alarm uitzetten
Druk op de “PRE. - / ALARM 1” of “PRE. + / ALARM 2” knop om het alarm 1 of alarm 2 uit te zetten.
Bediening
Volume regelen
Het volume kan eenvoudig worden geregeld met behulp van de “VOLUMEREGELAAR”.
Inslaapfunctie
Druk kort op de “SLEEP” knop om de gewenste inslaaptijd te selecteren in stappen van 10 minuten
tussen 120 en 10 minuten en vervolgens van 5 minuten naar UIT.
ANTENNE
Voor de beste ontvangst, trek de antenne helemaal uit en draai deze.
Naar de AM / FM / LW radio luisteren
1. Druk kort op de “STANDBY / BAND” knop om het toestel in te schakelen.
2. Druk op de “STANDBY / BAND” knop om de AM / FM / LW radiofrequentie te wijzigen.
3. Er zijn twee opties om naar radiostations te zoeken en in het geheugen op te slaan.
Automatisch scannen:
Belangrijk! Aanwezige voorkeuzestations worden overschreven.
Druk en houd de “AMS / MODE” knop circa 3 seconden ingedrukt. Het systeem scant de volledige
frequentieband om naar radiostations te zoeken. Elk gevonden station wordt in het geheugen
opgeslagen, van de laagste naar de hoogste frequentie.
Handmatig scannen:
Druk kort op de “SKIP+” en “SKIP-” knop totdat u het gewenste radiostation hebt gevonden. Als u een
van de knoppen ingedrukt houdt, zoekt het toestel naar het vorige of volgende radiostation.
Voorkeuzestation:
1. Druk en houd de “AMS / MODE” knop op het toestel circa 2-3 seconden ingedrukt om het
automatisch instellen van de voorkeuzestations te starten.
2. Het scherm heeft de geheugenpositie weer en de radiostations worden automatisch op volgorde
in het geheugen opgeslagen (Opmerking: Elke geheugenpositie is 1 voorkeuzestation dat tijdens
het automatisch instellen wordt opgeslagen.)
3. Eenmaal alle stations automatisch in het geheugen zijn opgeslagen, druk op de “PRE. - / ALARM
1” of “PRE. +/ ALARM 2” knop om de voorkeuzestations te selecteren.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson RT300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson RT300 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info