Manual Thomson ROC8507 (page 7 of 48) (English, German, Dutch, French, Italian, Spanish)

607824

Zoom out

Zoom in

1/48

System setup

Using the SETUP keys (hold down for 7 seconds), and

the navigation keys 5,6,4,3, OK go to the SYSTEM

SETUP screen in order to access the settings for volume,

time, date, backlighting and deleting options. Then

navigate using keys 5,6,4,3, OK.

Volume control and Mute setup

This remote control allows you to de ne the mode that

the Volume and Mute ( ) keys will control.

When it is shipped, this remote control is set so that

the Volume and Mute keys control the current mode

the remote control is in. If this mode does not have a

volume control function, then the Volume and Mute keys

automatically control the TV mode.

Volume control and mute setup in one mode

Used to assign to one mode (TV or AUDIO, or ...) the

Volume and Mute keys ( ) without having to select

that mode during daily use.

1. Using the SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display SET

CODES followed by SYSTEM SETUP (press OK) then

VOL/MUTE CONTROL SETUP. (press OK) then SET ALL

VOL. TO 1 MODE (press OK) then SET ALL VOL. TO

MODE?.

2. Press once on the key of the device to be controlled

(TV, DVD, VCR, etc.).

3. The screen brie y displays PLEASE WAIT then

SUCCESS before exiting this setup.

Note: If the mode selected does not itself display the

Volume/Mute commands, VOLUME CONTROL ERROR is

shown on the screen and the remote control exits the setup

function and returns to normal operation.

Volume control and mute setup in each mode

Used to assign the Volume and Mute keys

( ), for each mode desired.

1. Using the SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display CODE

SETUP followed by SYSTEM SETUP (press OK) then

VOL/MUTE CONTROL SETUP (press OK) navigate up

to SET VOLUME FOR 1 MODE (press OK) then SET

THE VOLUME FOR MODE?.

2. Press once on the key of the device to be controlled

(TV, DVD, VCR, etc.).

3. The screen brie y displays PLEASE WAIT then

SUCCESS before exiting this setup.

Note: before using this setting, verify that the mode selected

has its own Volume/Mute functions either in the code or

by learning; otherwise, the Volume/Mute keys will have no

e ect.

Resetting the Volume control and mute control

Used to cancel the settings of the preceding paragraphs

(return to the default factory-installed settings).

1. Using the SETUP keys (hold down for 7

seconds), and navigation keys 5,6,4,3,

OK, display CODE SETUP followed by SYSTEM

SETUP (press OK) then VOL/MUTE CONTROL SETUP

(press OK) navigate up to VOL/ MUTE CONTROL

RESET.

2. Press OK once.

3. CONFIRM OK TO RESET is displayed.

4. P ress OK once to con rm cancellation.

5. The screen brie y displays PLEASE WAIT then

SUCCESS before exiting this setup.

Setting the time

1. Using the SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display

CODE SETUP then SYSTEM SETUP (press OK) and

navigate up to TIME SETUP.

2. Press OK once.

3. Set the format to 12 or 24 hours using 5,6, and

con rm using OK.

4. Set the hour then the minutes using 5,6,

(move from hours to minutes using OK) and con rm

using OK.

5. The display brie y indicates SUCCESS before

returning to CODE SETUP.

Setting the date

1. Using the SETUP keys (hold down for 7 seconds)

and navigation keys 5,6,4,3, OK, display CODE

SETUP followed by SYSTEM SETUP (press OK) then

navigate up to DATE SETUP

2. Press OK once.

3. Using keys 5,6, and OK, successively set the year,

month, date and day.

4. The display brie y indicates SUCCESS before

returning to CODE SETUP.

Setting the backlight

Used for setting the backlight delay following a key

action.

1. U sing the SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display CODE

SETUP then SYSTEM SETUP (press OK) and navigate

up to BACKLIGHT SETUP.

2. Press OK once.

3. U sing keys 5,6 and OK, set the backlight time,

from 5 to 60 seconds, when BACKLIGHT TIME? is

displayed.

Note: the default time is 10 seconds. In order to deactivate

the backlight function, set the time to 00 and press OK

once.

4. T he display brie y indicates SUCCESS before

returning to CODE SETUP.

Setting the LCD display langauge

Used to select one of the 7 languages o ered by your

remote control.

1. U sing the SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display CODE

SETUP then SYSTEM SETUP (press OK) and navigate

up to LANGUAGE SETUP.

2. P ress OK once.

3. U sing keys 5,6 and OK, select the language when

LANGUAGE? is displayed.

4. T he display brie y indicates SUCCESS before

returning to CODE SETUP.

Cancelling your settings

Used to recon gure the remote control to the default

settings by erasing all the settings and storage of codes

and keys.

1. U sing the SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display

CODE SETUP then SYSTEM SETUP (press OK) and

navigate up to SYSTEM RESET.

2. P ress OK once.

3. P ress OK once when CONFIRM OK TO RESET is

displayed.

4. T he display brie y indicates PLEASE WAIT before

leaving this setting.

Setting the Timer

Using the SETUP keys (hold down for 7 seconds), and

navigation keys 5,6,4,3, OK, go to the TIMER SETUP

display in order to access the stand-by settings for the

TV set and 4 other timers that send sequences of at most

4 keys. Then navigate using keys 5,6,4,3, OK.

Programming the combo (combined) codes:

for certain combos (TV/VCR, TV/DVD, DVD/VCR, etc.), you

will have to press two keys in di erent modes in order

to control the two devices the make up the combo. For

example, if you have a TV/DVD Combo, you may have

to set a code using the TV key for the TV set AND a

separate code (using another mode key) to control the

DVD player.

Combo commands:

certain combos (TV/VCR, TV/DVD, DVD/VCR,…) have

separate keys on the original remote control for

selecting the Combo device that you wish to control.

For example, if your Combo is a DVD/VCR, its original

remote control may have separate DVD and VCR keys

for selecting the combo device you wish to control.

You may obtain the equivalent key functions on your

remote control using the Mode and SETUP keys.

Supposing that your Combo has a DVD and a VCR,

and that its code is programmed in DVD mode, hold

down the DVD Mode key for over 1 second in order to

send the DVD key command. In order to send the VCR

key command, press and quickly release the SETUP

key, then press and release the DVD Mode key. This

procedure may apply regardless of the type of Combo

(TV/VCR, TV/DVD, DVD/VCR, etc.), and is available in

all modes. This function is not guaranteed for all the

codes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson ROC8507 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson ROC8507 Manual

Product: