Manual Thomson ROC5209 5IN1 (page 2 of 34) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

607852

Zoom out

Zoom in

1/34

ROC5209

00131867

Operating Instructions .......................................................... 01

Mode d‘emploi ....................................................................... 05

Bedienungsanleitung ............................................................. 09

Istruzioni per l‘uso ................................................................. 13

Instrucciones de uso ............................................................. 17

Gebruiksaanwijzing ............................................................... 21

Manual de instruções ............................................................ 25

Οδηγίες χρήσης..................................................................... 29

Руководство по эксплуатации . ........................................ 33

Instrukcja obsługi ................................................................... 37

Návod k použití . ..................................................................... 41

Használati útmutató .............................................................. 45

Bruksanvisning ....................................................................... 49

Brukerveiledning .................................................................... 53

Brugsanvisning ....................................................................... 57

Pistokelaturi ............................................................................ 61

This universal remote control ROC5209 (5 in 1) is compatible with the majority of television

sets, DVD players and video recorders, as well as digital boxes such as satellite or cable

receivers, DVBT receivers (Digital Video Broadcast Terrestrial), ADSL decoders, and so on.

The ROC5209 comes with a convenient base/stand that you can place the remote in when

you’re not using it. The base/stand also has a Find/Page feature, which lets you quickly ﬁ nd

the remote if you’ve misplaced it. You simply press the Page key on the base and the remote

sounds with a tone, making it easy to locate.

This remote control was programmed in the factory, so that you can use it to control most

of the sets of the THOMSON group’s make. For this reason, we recommend that prior to

attempting to programme the remote control, you try it out by means of one of the methods

described in this user manual. However, ﬁ rst, install 2 AAA batteries in both equipments: the

remote control and the base.

Please keep this guide along with the code list (provided separately), so that you can subse-

quently programme your remote control for use with other sets.

1 G : On/Standby or Standby only, depending on

the equipment being used.

2 Indicator lamp: The red indicator lights up when

any key is pressed.

3 Prog+/Prog-: Channel Up and Channel Down

buttons.

4 H (Mute): Switches the selected appliance sound

off.

5 Mode keys: Select the device to control (TV, DVD,

…)

6 Vol+/Vol-: Increases (+) or decreases (-) the

volume of the selected device.

7 Setup: Allows you to program your remote

before the ﬁ rst use. It also allows you to access to

secondary functions of certain A/V appliances

(Shift). Press and release the "Setup" key

followed by the function key you want.

8 : Displays information of the selected

appliance.

9 Numeric keys 0-9: These keys have the same

functions as those of your original remote and

are also used to enter the codes for different

products.

10 Learn: Used for the learning codes procedure

(key copying) (see page x).

11 AV: For selecting an external source (SCART,

HDMI, ...)..

12 -/--: In connection with the numeric keys, this

button allows you, with some equipment, to select

directly channels with 2 digits.

13 Menu / : Turns on the menu of the selected

product / Setup + : Teletext On.

14 Exit / : Turn off the menu of the selected

product / Setup + : Teletext Off.

15 C/D: Allow you to navigate the menus verticaly.

16 A/B : Allow you to navigate the menus

horizontally.

17 B (Play): Play a DVD disc (DVD, VCR, ...).

F (FF): Fast forward (DVD, VCR, ...).

E (RW): Goes backward (DVD, VCR, ...).

J (Pause):

Suspends play and stops on an image

K (Stop): Stop the disc (DVD, VCR, ...).

(Record): To record, press the RECORD key twice.

18 OK: Conﬁ rms a selection.

19 Coloured keys: Can be used to select categories

when teletext is activated, and speciﬁ c functions

depending on the make.

20 Guide: Electronic Program Guide.

The keys

Testing the remote control before

you programme it

1. Turn on the product you want to control.

2. Press the Mode key that corresponds to the type

of product you want to control: TV: television set,

DVD: DVD player, VCR: video recorder, SAT/

CAB: satellite or cable receiver, AUDIO/AUX:

audio equipment or any other equipment.

3. Direct the remote control towards your equipment

and try to switch it off by simply pressing the key G.

If the device does not turn off, you must program the

remote control using one of the methods A, B, C or

D described hereafter.

Note 1: Except for the TV key, the DVD, VCR,

SAT/CAB and AUDIO/AUX mode keys can be

programmed to control a device other than that

indicated on the key. It is therefore possible, for

example, to allocate SAT mode to the DVD key. You

must enter the code corresponding to the manufacturer

and the device by using one of the methods indicated

in this manual.

However, method D (automatic search for a code)

will greatly simplify the task for you. In this case it

is only necessary to enter a code from the list that

corresponds to the type of device, for example: 0603

for a Thomson satellite receiver) and then to run the

automatic search procedure. The remote control will

then test all the codes automatically until it ﬁ nds those

that control the receiver.

Note 2: To control 2 devices of the same type and the

same brand (2 Thomson VCRs, 2 Thomson satellite

receivers, ...) ensure ﬁ rst that these two devices are not

set to react to the same sub code, they will require one

sub code for one and a different sub code for the other

(i.e., codes A and B with Thomson devices). Once you

have checked this, successively program 2 separate

mode keys using method D.

ogramming

the remote control

Method A – Fast pr

ogramming

with 1-digit subcode

Before you start programming, you must ﬁ nd the

subcode of the set to be controlled. Entering a subcode

lets the remote control test a predeﬁ ned list of codes.

Refer to the list provided with these instructions, page

I of the subcodes.

1. Switch on the set you want to control.

2. Hold down the SETUP key until the red indicator

lamp blinks and then remains lit (the indicator light

remains on for a few seconds to give you the time to

proceed with the following steps. The indicator lamp

ﬂ ashes to signal that this time is almost up, and then

goes off).

3. Press the key that corresponds to the type of

equipment you want to control:

TV: television set, DVD: DVD player, VCR: Video

recorder, SAT/CABLE: satellite receiver, cable,

DVBT, ADSL, AUDIO/AUX: audio equipment and

any other appliance.

4. While the indicator is lit, type in the subcode

(example: 1 for THOMSON).

5. Direct the remote control towards the set and try to

switch it off by pressing the key G.

6. If the set you want to control switches off, press OK

to memorise the code.

7. Should the set not switch off, press key G repeatedly,

until the set switches off. Between two key presses,

leave enough time for the red indicator lamp to light

up again (about 1 second). Proceeding this way will

enable you to see whether the set responds or not.

8. Immediately upon the switching-off of the set to be

controlled, press OK to store the code.

Check of the programming:

In principle, your set is ready for receiving the remote

control commands.

Check your remote control for proper functioning by

performing the test described on page 2.

Method B – 4-digit codes

programming

Before you start programming, you must ﬁ nd the code

of the set to be controlled.

Refer to the list provided with these instructions, page

II of the codes.

1. Switch on the set you want to control.

2. Hold down the SETUP key until the red indicator

lamp blinks and then remains lit (the indicator light

Characteristics - Caractéristiques - Eigenschaften - Caratteristiche

Características - Eigenschappen - Características - χαρακτηριστικά

Технические характеристики - Dane techniczne - Technické údaje

Karakterisztika - Data - Karakteristikker - Data - Ominaisuudet

Dimensions - Dimensions - Abmessungen - Dimensioni - Dimensiones

- Afmetingen - Dimensões - Διαστάσεις - размеры -

Wymiary - Rozměry

- Méret

- Mått - Dimensjoner - Mål - Mitat

= 190 x 52 x 19 mm / 73 x 77 x 81 mm

Weight = 90/110 grammes

Poids = 90/110 grammes

Gewicht = 90/110 Gramm

Peso = 90/110 grammi

Peso = 90/110 gramos

Gewicht = 90/110 gram

Peso = 90/110 gramas

Βάρoς = 90/110 γραμμάρια

вес = 90/110 грамм

Ciężar = 90/110 g

Hmotnost = 90/110 g

Súly = 90/110 gramm

Vikt = 90/110 gram

Vekt = 90/110 gram

Vægt = 90/110 gram

Paino = 90/110 grammaa

AAA

00131867bda.indd 4-Abs1:100131867bda.indd 4-Abs1:1 22.09.2009 10:02:35 Uhr22.09.2009 10:02:35 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson ROC5209 5IN1 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson ROC5209 5IN1 Manual

Product: