Manual Thomson ROC Z907 (page 7 of 50) (English, German, French, Italian, Polish, Portuguese, Spanish)

699754

Zoom out

Zoom in

1/50

•Onthe original handheld transmitter,press and hold

the button you arecopying until the redfunction

LED of the ROCZ907 ashes quickly (= conrmation

that the remote control signal has been successfully

accepted).

•Now press buttons 2and 3onthe original handheld

transmitter (master function). While the LED of the

original handheld transmitter ashes quickly,press the

button that you wish to copy (once). The redfunction

LED (1) of the ROCZ907 now ashes quickly.

•Now press the button you wish to program and store

on the ROCZ907 (for example, button ‘1’). The redLED

on the ROCZ907 goes out to conrm programming.

•Then check whether the door can be controlled using

the button that has been taught to; if not, repeat the

procedure. If this still does not work after your re-

newed attempt, then it is necessary,for your model, to

synchronise the handheld transmitter with the receiver

of the door operator system.

•Tosynchronise the ROCZ907 with the door operator,

press and hold the programmed button of the ROCZ907

until the redLED ashes quickly (about 10 seconds).

Release the button. Programming has been carried out

when the redLED on the ROCZ907 goes out.

7.3.3 Example for V2 (manufacturer):

•Beforeperforming the copy function, make surethat

the original handheld transmitter and the ROCZ907

arefacing each other and not morethan 3cmapart.

•Make surethat you areclose to the door operator

receiver (about 50 cm).

•Press and hold the ‘1’ button on the ROCZ907 and

keep it held while pressing the ‘2’ button four times.

Release both buttons. The redfunction LED (1) now

ashes about every 2seconds.

•Onthe original handheld transmitter,press and hold

the button you arecopying until the redfunction LED

(1) of the ROCZ907 lights up and successively ashes

twice about every 2seconds.

•Again press the button you arecopying on the original

handheld transmitter until the redLED ashes quickly.

•Press the button you wish to program (for example,

‘1’) to conrm. The redfunction LED (1) goes out.

•Press and hold the programmed button of the ROCZ907

until the redLED ashes quickly (about 10 seconds).

Release the button. Programming has been carried out

when the redLED on the ROCZ907 goes out.

•Then check whether the door can be controlled using

the button that has been taught to. If not, repeat the

procedure.

Note

Forinformation on additional possibilities, please

refer to the current compatibility list and the extended

operating instructions at www.hama.com or

www.thomson-av-accessories.eu.

8. Technical Data

Dimensions 76 x27x39mm

Range

max. 40 m(depending on

buildings and other local con-

ditions, or on the performance

of the reception antenna)

Input voltage 12 V

Standby max. 72 h

USB output 5V/2100 mA

Frequency band 433 MHz, 868 MHz

Max. emitted

transmitting power

10 mW

9. Careand Maintenance

Only clean this product with aslightly damp, lint-free

cloth and do not use aggressive cleaning agents. Make

surethat water does not get into the product.

10. Warranty Disclaimer

Hama GmbH &Co. KG assumes no liability and provides

no warranty for damage resulting from improper

installation/mounting, improper use of the product or

from failuretoobserve the operating instructions and/

or safety notes.

11. Service and Support

Please contact Hama Product Consulting if you have any

questions about this product.

Hotline: +49 9091 502-115 (German/English)

Further support information can be found here:

www.hama.com

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomson ROC Z907 in the language / languages: English, German, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 0,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomson ROC Z907 Manual

Product: