655281

Thomson Mica - TH-020DR2WE Manual

47
Zoom out
Zoom in
Previous page
1/52
Next page
19
Using the answering machine (TAM)
This product can digitally record up to 12 minutes of message.
You can operate your answering machine from the handset, or remotely from other telephones.
You will need to set the correct date and time (if you have not already done so) so that you will know when
each message was received. If you subscribe to Caller display service, the date and time would be set on the
handset automatically. If you need to set is manually, please reset it under CLOCK & ALARM > DATE & TIME.
The PIN code for remote access to answering message is same as the system PIN (default as 0000). If you
change to your own system PIN code, the remote access PIN code need to be changed accordingly.
Switch the answering machine on/off
1. Press MENU button. Scroll ▲ or ▼ button to select ANSW MACHINE.
2. Press OK button. Scroll ▲ or ▼ button to select TAM ON/OFF.
3. Press OK button. Scroll ▲ or ▼ button to select ON or OFF.
4. Press OK button to confirm.
Set an answer mode
1. After switching the answering machine on, scroll ▲ or ▼ button to select ANSWE MODE.
2. Press OK button. Scroll ▲ or ▼ button to select ANSW & RECORD or ANSWER ONLY.
3. Press OK button to confirm.
Outgoing messages (OGMs)
The outgoing message is the message a caller first hears when the answering machine picks up their call.
This product has two pre-recorded outgoing messages, one is for answer & record and one is for answer
only. You can also record your own. If you record you own outgoing messages, the original OGM will be replaced.
If you delete you own message, the original OGM will be re-instated.
Play, record and delete OGMs
1. Press MENU button. Scroll ▲ or ▼ button to select ANSW MACHINE.
2. Press OK button. Scroll ▲ or ▼ button to select RECORD OGM.
3. Press OK button. Scroll ▲ or ▼ button to select ANSW & RECORD or ANSWER ONLY. Press OK button.
a. Scroll ▲ or ▼ button to select PLAY OGM. The OGM will be played.
b. Scroll ▲ or ▼ button to select RECORD OGM. Press OK button. The display shows RECORDING…Speak
your own OGM to the handset and press OK to confirm.
c. Scroll ▲ or ▼ button to select DELETE. Press OK button. The recorded OGM will be deleted and the
default OGM will be played.
Listening to your messages
1. Press MENU button. Scroll ▲ or ▼ button to select ANSW MACHINE.
2. Press OK button. The display shows PLAY. Press OK button. The answering machine messages will be played
from the latest received ones to the old messages.
During message playing, press ▲ or ▼ button to adjust the speakerphone volume, and
a. Press 1 to skip back to the previous message.
b. Press 3 to skip forward to the next message.
c. Press 2 to stop playing.
Note: when there are new answering messages, you can also press R button directly in standby mode to listen to
the messages.
Delete an answering message
1. Press MENU button. Scroll ▲ or ▼ button to select ANSW MACHINE.
2. Press OK button. The display shows PLAY. Press OK button. The answering machine messages will be played
from the latest received ones to the old messages.
3. During message playing, press OK button. The display shows REPEAT.
4. Scroll ▲ or ▼ button to select DELETE. Press OK button. The current playing message will be deleted.
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson Mica - TH-020DR2WE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson Mica - TH-020DR2WE in the language / languages: English, French as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info