699795
23
Zoom out
Zoom in
Previous page
1/212
Next page
- EN 6 -
Battery power
Be sure that the batteries are inserted correctly to avoid damage to the appliance. Always remove
the batteries when appliance will not be used for a long period of time, as this will cause leakage to
the batteries and subsequently damage to your set.
Use batteries of the same type. Never use different types of batteries together.
Do not throw the battery into the re, or exposed to sunshine or the like.
If the liquid contained in the batteries comes in contact with eyes or skin, wash the area immediately
and carefully with clear water and consult a doctor.
Unit power supply (mains 230V/50Hz)
Connect the power cable plug to the (230V) wall outlet.
Warning:
Before using the unit, check that the local mains supply is compatible with the unit 230V (50Hz).
Do not plug or unplug the power cable when your hands are wet.
When planning not to use this unit for long periods of time (i.e. vacation etc.), disconnect the plug
from the wall outlet.
When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord in order
to avoid shock risks caused by the damaged cable.
Operation
Press the POWER button to turn the unit ON/OFF.
Adjusting the volume
Rotate the Volume knob clockwise to increase the volume.
Rotate the Volume knob anti-clockwise to decrease the volume.
Check the display, which will conrm the volume setting.
Mute Function
Press the MUTE button on the remote control. The volume is muted and “Volume Muted” will appear
on the LCD display. Press this button again to cancel the mute function.
Clock and Timers
Setting the clock and date
After the unit is plugged into a mains supply or following a mains power failure, the display will show the
current time and date on the LCD display. The unit should be in standby mode to set the current clock.
1. Press the CLOCK button; “Time setup” is displayed. Press ENTER to conrm; “time wizard
interval” is displayed.
2. Press / to select “24H” or “12H”. Press ENTER to conrm. The hour digits on the display
will blink.
3. Press / to set the hour; press ENTER to conrm. The minutes digits on the display will
blink.
4. Press / to set the minutes; press ENTER to conrm. The year digits on the display will
blink.
5. Press / to set the year; press ENTER to conrm. The month digits on the display will blink.
6. Press / to set the month; press ENTER to conrm. The day digits on the display will blink.
7. Press / to set the day; press ENTER to conrm. Press / to select “YES/NO”
Setting the alarm
Note: Check that the radio has the correct time and date before you set an alarm.
This unit may be used as an alarm clock. The Bluetooth device, CD/USB device or DAB/FM radio is
activated to play at a preset time.
1. Press the POWER button to switch the unit to standby mode.
2. Make sure that you have set the clock correctly.
3. Press the ALARM button in shutdown state; press ALARM twice to set Alarm 2.
4. “Alarm 1 (or 2) Setup” is displayed. Press the ENTER button to select.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson MIC255I DAB BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson MIC255I DAB BT in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 11,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info