627898
18
Zoom out
Zoom in
Previous page
1/68
Next page
BLUETOOTH
®
MICRO SYSTEM
MIC192U
INSTALLATION USE
SETTING THE CLOCK
In stand-by mode:
• Press CLOCK SET.
• Press 7 or 8 to 12 or 24 hours mode.
• Press SELECT to conrm: the hour display ashes.
Adjust the hour using the 7 or 8 keys.
Press SELECT to conrm: the minutes display ashes.
Adjust the minutes using the 7 or 8 keys.
Press SELECT to conrm.
SET THE ALARM
• Press and hold during 2 seconds ALARM1 / ALARM2:
symbols / and the hour display ashes on the
screen.
• Adjust the hour using the 7 or 8 keys, then press
SELECT to conrm: the minutes display ashes.
• Adjust the minutes using the 7 or 8 keys, then press
SELECT to conrm.
• Press 7 or 8 to select BUZZER / RADIO / CD /
USB as a source of alarm, then press SELECT to
conrm. Note: If the USB source is selected, but no
USB device is connected, the unit will switch BUZZER
automatically.
• Press 7 or 8 to adjust the volume.
(The default alarm volume is 15).
ACTIVATE / DEACTIVATE AND STOP THE ALARM.
To enable:
• Press ALARM1 / ALARM2: symbols / appear on
the screen.
To disable:
• Press ALARM1 / ALARM2 to disable: until the symbols
/ disappear.
To stop:
• When the alarm sounds, press q to stop it.
To repeat:
• Press SNOOZE on the remote control or any key on
the device to temporarily stop the alarm, that alarm
will sound again after 9 minutes for 60 minutes. The
symbols / ashes and the SNOOZE symbol
appears on the screen.
INSTALLATION (See pictures below)
The device can be installed:
On a stand (6):
• Put the hooks from the base in the central cavity at the
back of the device. Check that the base does not come
off. To remove the base, pull it downwards.
On the wall:
• Use a spirit level to mark the holes to be drilled.
• Drill holes at the marked points then insert the wall
plugs.
• Attach the 2 xing wedges to the wall using the 2
screws (included).
• Screw in the 2 screws (included) to the wall.
Then attach the sound bar and make sure it is stable.
MAINS POWER SUPPLY
Caution:
• Risk of damaging the product! Make sure that the input
voltage corresponds to the voltage indicated on the
device.
• Connect the mains adapter plug to the socket (5).
• Connect the adapter to a plug socket.
• Only use the adapter provided. To use another adapter,
check that it has identical characteristics and is
compliant with current standards.
TURN ON / STANDBY
Press q to switch on the device or put it in standby mode.
Note:
• When the device is turned on, if it is not used for 20
minutes, it automatically switches onto standby mode.
6
142 mm
4
Screw
Fixing wedges
Wall plugs
plastic
16EN
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson MIC192U at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson MIC192U in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info