655319

Thomson Amber TH-103 Manual

16
Zoom out
Zoom in
Previous page
1/23
Next page
- 15 -
Set Zero Emission （NEMO）
For DECT system, the base unit should always keep sending a beacon signal to handset unit to
make sure its existence. So that it can guarantee base unit can immediately connect to handset
unit whenever ring come. This beacon signal is a 1V/m 1.8GHz RF power with 0.5ms for every
10ms. This DECT phone is equipped with a NEMo (No Emission Mode) feature to make real no
emission and still can achieve immediate reaction. In other word, when handset in stand-by
status, the base unit is no RF emission.
To set the handset to normal DECT system or Zero Emission
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [BS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [NEMO] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
Note: It has a drawback on NEMO mode that the handset cannot detect out of range at stand-by
status.
Restoring the Default Base Setting
You can restore the factory settings for the telephone base at any time.
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [BS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [BS DEFAULT] and press <OK>.
(4) Enter the PIN code and press <OK>
Handset settings
Alarm Function
You can use handset as an alarm clock to wake you up by defined time.
(1) Press <MENU> button
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [ALARM] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
(5) Use the <▲> or <▼> button to enter hours in 24 hour format and press <OK>.
(6) Use the <▲> or <▼> button to enter minutes and press <OK>.
(7) Use the <▲> or <▼> button to turns snooze on or off and press <OK>.
Handset Ringer Tone
Set External Call Ring Tone
You can change the ringer tone for an incoming call (external).
(1) Press <MENU> button or press and hold button for 3 seconds.
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [RING SETUP] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [EXT RING] and press <OK>.
(5) Select the ringer tone you want, and then press <OK>.
Set Intercom Ring Tone
You can change the ringer tone for Intercom call (internal).
(1) Press <MENU> button
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
Downloaded from www.Manualslib.com manuals search engine
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson Amber TH-103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson Amber TH-103 in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson Amber TH-103

Thomson Amber TH-103 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info