582477
18
Zoom out
Zoom in
Previous page
1/24
Next page
EN 18
English
Chapter 6 - Network
High-Gain USB Adapter (USB dongle) delivered with
your TV to your TV’s USB 1 port.
1. Press MENU on the remote control and select
Network > Network settings > Internet
connection. Press ◄/► to select On.
2. Press ▲/▼ to select Interface, then set ◄/► to
Wireless to select wireless-mode connection.
3. Press ▲/▼ to select Wireless setting and press
OK/► to enter.
4. You can set up the wireless network connection in
3 ways: a) or b) or c).
- a) Scan
Press ▲/▼ to select Scan, then press OK/►.
The TV will search all access points within
range, access points found by the TV will be
displayed.
Press ▲/▼ to select an available access point,
then press OK/► to connect the TV.
Notes:
- If you select a protected access point, you will
have to enter the corresponding password.
Press OK on the remote control to display the
virtual keyboard to enable you to enter the
password.
- This set is able to memorize the available
access point, which enables it to connect to
the network even if you switch on your TV
after power-off.
- b) Manual
Press ▲/▼ to select Manual, then press OK/►,
you will be prompted to enter the correct SSID
of an available wireless router to set up the
connection.
- c) Auto
If your AP (Access Point) supports WPS (Wi-
Fi Protected Setup), you can connect to the
network via PIN (Personal Identication Number)
or PBC (Push Button Conguration). WPS will
automatically congure the SSID and WPA key
in either mode.
Press ▲/▼ to select Auto, then press OK/► to
enter.
PIN: Select PIN and press OK/► to enter.
Choose a random PIN code. Make sure
this code is installed on the AP. (For the
procedures, refer to your router manual.) Press
OK/► again to set up the connection.
PBC: If your router has a PBC push button,
select PBC, then press OK/► to enter. Press
the PBC push button on your router within
2 minutes after you press OK/► again. Your
TV will automatically acquire all the network
setting values it needs and connect to your
network.
Network connection
You can set up your TV so that it can access the
Internet through your local area network (LAN) using
a wired or wireless connection.
Connecting to a wired network
You can attach your TV to your LAN using cable in
three ways:
You can attach your TV to your LAN by connecting
the LAN port on your TV to an external modem
using a Cat 5 cable.
You can attach your TV to your LAN by connecting
the LAN port on your TV to an IP Sharer, which is
connected to an external modem. Use Cat 5 cable
for the connection.
Depending on how your network is congured,
you may be able to attach your TV to your LAN by
connecting the LAN port on your TV directly to a
network wall outlet using a Cat 5 cable. Note that
the wall outlet is attached to a modem or router
elsewhere in your house.
1. Press MENU on the remote control and select
Network > Network settings > Internet
connection. Press ◄/► to select On.
2. Press ▲/▼ to select Interface, then set ◄/► to
Ethernet to select wired-mode connection.
3. Press ▲/▼ to select Connection test, then press
OK/► to check the Internet connectivity. If it does
not work, follow step 4 below.
4. Select Network > Network settings > IP setting,
then press OK/► to enter the IP setting menu.
You can set Address type to Auto or Manual.
- Select Auto if you want the TV to acquire and
enter the needed IP address automatically.
- Select Manual if you want to enter your IP
address manually, then:
Press ▼ to go to the rst entry eld.
Enter the IP address, Subnet mask, Default
gateway, Primary DNS and Secondary DNS
values. Use the alphanumeric buttons to enter
numbers and the arrow buttons to move from
one entry eld to another.
- Once Auto or Manual IP setting is completed,
press MENU to go back, press ▲/▼ to select
Connection test, then press OK/► to check the
Internet connectivity again.
5. If you want to see the information on current
connection, such as Interface, Address type,
IP address, etc., select Network > Network
settings > Information, then press OK/►.
Connecting to a wireless network
To connect your TV to your network wirelessly, you
need a wireless router or modem and a Wireless
LAN Adapter (some TV models are equipped with
an integrated LAN Adapter). Connect your Wireless
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson 55UZ8766 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson 55UZ8766 in the language / languages: English as an attachment in your email.

The manual is 4,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info