559111
9
Zoom out
Zoom in
Previous page
1/21
Next page
EN
9
English
5.
Once the automatic search ends, press
MENU
to
return to the previous step or press
OK
to restart
your channel search.
6.
After the automatic search, channels are arranged
in a preset order. If you wish to skip channels,
modify the preset order or rename channels, select
Settings > Setup > Organiser
and press
OK/►
to
enter.
Using your TV
Accessing channels
Using the alphanumeric buttons:
press the
corresponding alphanumeric buttons to access the
channels.
Using the PR+/- or P+/- buttons:
scroll through the
channels.
Watching connected devices
Repeatedly press
SOURCE
on the remote control
or
OK
on the TV set to toggle between TV and
other input sources. To resume TV viewing, press
any numeric button to enter the channel, while
P+/-
will cycle through all TV channels and other input
sources.
Note: Not all models have OK button on the set.
Volume
Volume control: use the
VOL +/-
or
VOL ◄/►
buttons
on the TV set or
V+/-
buttons on the remote control to
increase or decrease the volume.
Sound mute: press the button to temporarily mute
the sound. Press this button again or the
V+
button to
restore it.
Using TV menus
1.
Press
MENU
to display the main menu. (Refer to
Figure 3.)
2.
Press
▲/▼/◄/►
to select the desired item, then
press
OK
to open the corresponding submenu.
3.
In submenus, use
▲/▼
to select menu options,
use
◄/►
to set functions or change values. Use
OK
to activate a setting. Use
OK/►
to open the
corresponding submenu.
4.
Press
MENU
to return to the previous menu.
5.
Press
EXIT
to close the menu.
Note: Some options may not be available for
certain signal sources.
Selecting menu language
You can choose your preferred menu language
following the instructions below.
1.
Press
MENU
to display the main menu.
2.
Press
▲/▼/◄/►
to select
Settings > Setup
, then
press
OK
to enter.
3.
Select
Language
and press
OK/►
to enter.
Using your TV
Chapter 4
according to your country. At this step, you will be
requested to enter your password.
3.
Press
▲/▼
to select
Tuner mode
, then
press
◄/►
to select
Antenna
or
Cable
or
Satellite
.
(Note: Satellite option may not be
available for certain models.) Then follow a) or b)
or c) below.
- a) If you have selected
Antenna
.
Press
▲/▼
to select
Channel install
, and
press
OK/►
to enter.
Select
Automatic search
(Refer to Figure 2.),
then press
OK/►
to display
Automatic search
.
Press
OK
to skip the country selection and
enter the next step. Or use
◄/►
to reselect
your country, then press
OK
to enter.
Select
Digital & Analogue
or
Digital
or
Analogue
, then press
OK/►
to start the
automatic search, which relates to all DVB-T
digital and/or analogue channels.
- b) If you have selected
Cable
.
Press
▲/▼
to select
Channel install
, and
press
OK/►
to enter.
Select
Automatic search
, then press
OK/►
to
display
Automatic search
.
Press
OK
to skip the country selection and
enter the next step. Or use
◄/►
to reselect
your country, then press
OK
to enter.
- If you select
Digital & Analogue
, then
press
OK/►
to enter. Select your scan
mode if available and congure proper cable
information in the same way as in Initial
setup. Press
▲/▼
to select
Scan
and press
OK/►
to start your automatic search relating
to all DVB-C digital and analogue channels.
- If you select
Digital
, then follow the same
process as above to start your automatic
search relating to all DVB-C digital channels.
- If you select
Analogue
, then press
OK/►
to start your automatic search relating to all
analogue channels.
- c) If you have selected
Satellite
.
Press
▲/▼
to select
Channel install
, and
press
OK/►
to enter.
Select
Automatic search
, then press
OK/►
to enter. You can select a proper satellite or an
operator.
Press
OK
to go to the next step. Before you
start scanning, you can press
OK
to edit the
parameters of the selected satellite. Then
with your desired options of
Scan mode
and
Channels
, select
Scan
and press
OK/►
to
start scanning.
4.
The search may take a few minutes. During the
process, you can press
MENU
to abort halfway.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson 46FW5563 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson 46FW5563 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomson 46FW5563

Thomson 46FW5563 User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info