472005
11
Zoom out
Zoom in
Previous page
1/11
Next page
EN 11
Design and specications are subject to change without notice.
Note: This manual covers products with either Share
& See or DLNA function. Share & See is DLNA-
compatible.
Connecting to a wired network
To be able to use the Share & See advanced function
of your TV, you will need a wired connection to a
router. This requires a network cable (or Ethernet
cable) to be connected to your router. The other end
of the cable is to be connected to your LAN (local
area network) port on your TV.
Connect your PC to your router, too. Follow the
steps in turn specied hereafter, then you can enjoy
recorded video, picture, music and/or text les saved
on your PC.
Network setup
1. Press Menu on the remote control and select
Options > Network > Conguration > Internet
connection. Press ◄/► to select On.
2. Select Options > Network > Applications >
Share & See, then press ◄/► to select On.
3. Select Options > Network > Conguration > IP
setting, then press OK/ to enter the IP setting
menu.
- Set Address type to Auto, it will acquire and
enter the needed IP address automatically.
- You can follow below steps to enter your IP
address manually.
Set Address type to Manual, then press ▼ to
go to the rst entry eld.
Enter the IP address, Subnet mask, Default
gateway, Primary DNS and Secondary DNS
values. Use the digit buttons to enter numbers
and the arrow buttons to move from one entry
eld to another.
4. Select Options > Network > Conguration >
Connection test, then press OK/ to check the
Internet connectivity. If success, Share & See
will be on. Otherwise, you need to check if the
IP address is available and/or if you’ve already
allowed your TV to share the designated les on
your PC.
5. Select Options > Network > Conguration
> Information, then press OK/ to display
the information on current connection, such as
Interface, Address type, IP address, etc..
Adding media from your PC for sharing
Install a DLNA media server in your PC. The simple
and familiar server you may install is Microsoft
Windows Media Player 11.
1. Open Microsoft Windows Media Player 11.
- Select Library > Media sharing.
- Check the checkbox Share my media to.
- Select the icon of the TV set connected to your
PC.
- Select Allow to allow the TV set to access your
PC, and select OK to enable your allowing.
Note: You can push Settings button to customize
your desired settings.
2. - Select Library > Add to Libray.
- Select your personal folders or folders of other
users that you can access for sharing.
- Select Add and press OK to enable your adding.
Share & See application
Press Menu on the remote control and select USB,
then press OK to launch Share & See applications.
Stopping Share & See function
1. Select Options > Network > Conguration >
Internet connection, and set it to Off.
2. Or select Options > Network > Applications >
Share & See, and set it to Off.
Notes for password in Parental Control Lock function:
- The default password is 1234. You can change it to a
new one.
- The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson 32FT5453 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson 32FT5453 in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info