471998
5
Zoom out
Zoom in
Previous page
1/10
Next page
EN 5
Select menu language
You can choose your preferred menu language
following below instructions.
1. Press Menu to display the main menu.
2. Press ▲/▼// to select Setup, then press OK
to enter.
3. Select Language and press OK/ to enter.
4. Select Menu language and press ◄/► to select
your desired language to display the menus.
5. Press Exit to close the menu.
Use more of your TV
Setup your favorite channels
You can create four lists of your favorite TV channels.
1. Press LIST.
2. Press the yellow button to enter Channel list
selection. Press ▲/▼ to select the favorite list
you want to set up your favorite channels. Then
press OK to enter the selected list.
3. Press the blue button to start to edit your favorite
list. Press ▲/▼ to scroll through the channel list
and press OK to select or unselect it.
4. Repeat this procedure to setup other favorite
channels.
5. Press LIST/Exit to exit.
ECO Dynamic backlight
1.
Press Menu on the remote control and select
Picture > ECO Dynamic back light.
2.
Press ◄/► to select desired power saving mode
to achieve desired power saving effect. At this time
the Picture preset option under Picture will be
set at Personal synchronically.
3. Press Exit to close the menu.
Shortcut operation: Press ECO on the remote
control to perform the same function mentioned above.
PAP function
To display the pictures from different source inputs
side by side. Note that one window is for both analog
and digital TV inputs, the other is for VGA, HDMI
and CMP inputs. (Note:AV input is invalid for both
windows.)
1. Press Menu to display the main menu.
2. Select PAP and press OK to enter.
3. Select the PAP option, and press ◄/► to turn on/
off PAP function.
4. Select TV position, press ◄/► to reposition the
TV window.
5. Press ◄/► to toggle the focus window.
6. When focus on TV window, the digit buttons and
P+/- work in TV. When focus on the other window,
P+/- can change available extension sources.
Use your TV & Use more of your TV
Chapter 3 & 4
OK/► to start your automatic search relating to
all DVB-C digital and analog channels.
- Select Digital, then follow the similar process
described above to start your automatic search
relating to all DVB-C digital channels.
- Select Analog, then press OK/► to start
your automatic search relating to all analog
channels.
4. The search may take a few minutes. During the
process, you can press Menu to abort halfway.
5. Once the automatic search ends, press Menu to
return to the previous step or press OK to restart
your channel search.
6. After the automatic search, channels are arranged
in a preset order. You can skip channels, modify
the preset order or rename channels.
Use your TV
Access channels
Using the digit buttons: press the corresponding
digit buttons to access the channels.
Using the PR+/- or P+/- buttons: scroll through the
channels.
Watch connected devices
Press Source on the remote control or OK on the TV
set to switch between TV and other input sources.
To resume TV viewing, press any digit button to
enter the channel, while P+/- will cycle through all TV
channels and other input sources.
Note: Not all models have OK button on the set.
Volume
Volume control: use the VOL+/- or VOL◄/► buttons
on the TV set or V+/- buttons on the remote control to
increase or decrease the volume.
Sound mute: press the Mute button to temporarily
mute the sound. Press this button again or the V+
button to restore it.
Use TV menu
s
1. Press Menu to display the main menu. (Refer to
Figure 3.)
2. Press ▲/▼// to select the desired item, then
press OK to open the corresponding submenu.
3. In submenus, use ▲/▼ to select menu options,
use / to set functions or change values. Use
OK to activate a setting. Use OK/► to open the
corresponding submenu.
4. Press Menu to return to the previous menu.
5. Press Exit to close the menu.
Note: Some options may be not available for
certain signal sources.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson 26HS2246 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson 26HS2246 in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info