559159
14
Zoom out
Zoom in
Previous page
1/15
Next page
EN 14
Other informationChapter 6
1. Press Option on the remote control and select
Quick access > PVR.
2. Press OK/► to enter.
3. Press:
- the red button to start recording, the record file is
put into a folder named after the channel number
under the PVR folder in Media center > Video;
- ▲/▼/◄/► to adjust the recording duration.
- the green button to stop recording manually;
in normal operation, the recording will stop
automatically when the recording duration has
passed.
4. In recording, PVR mini pane will also show on the
screen to indicate the recording progress.
5. To watch the recorded programme, exit PVR
mode first and go to Media center > Video. Select
the folder PVR, then select the related record file.
Press OK to play. (It is the same if you record a
digital radio programme).
Notes:
- Feature available only for digital non encrypted
channels. Even when CICAM (CI or CI+) is
inserted, feature is not available on encrypted
channels.
- Only supports USB drive of FAT32 format.
- Before you connect the USB drive to the set,
make sure you have backed up the data in the
drive to avoid the loss of your important data due
to unforeseen malfunction.
- The bigger the USB drive free memory for the
PVR function, the bigger the recording length.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The set cannot play files normally if the
parameters of the file exceed the limitations of
the system, the file format is not supported, the
file is damaged, or the file cannot be decoded.
- Do not disconnect the USB drive when the
system is reading a file or transmitting data,
otherwise the system or the drive may be
damaged.
Schedule list
This function is used to perform scheduled recording.
1. Press Option on the remote control and select
Quick access > Schedule list.
2. Press OK/► to display the schedule list.
3. To add a schedule into your schedule list, press
the red button first to display Schedule list. Then,
- Channel number: use ◄/► to select the
channel number.
- Start date: use the numeric buttons to set the
recording date.
- Start time: set the start time of the recording.
- Stop time: set the stop time of the recording.
- Schedule type:
Set Reminder to be reminded that you can
switch to the scheduled programme when the
time you have set comes. When time is out
and you do not execute any operation, the
dialogue box will disappear and no further
operation will be executed.
Set Record if you really want to start your
scheduled recording when the time you have
set comes. When time is out and you do not
execute any operation, scheduled recording
will start automatically.
- Repeat type: set different repeat modes for the
recording.
4. Press ▲/▼/◄/► to select Add, then press OK to
add the schedule you set into your schedule list.
5. Press the red button to repeat above procedures
to add another schedule.
6. If you wish to edit or delete a schedule, select it
and press OK to enter.
7. Press Exit to close the menu.
MHL (Mobile High-Definition Link)
(* not available for some models)
You can use the following functions by connecting the
TV HDMI port identied with MHL and the USB port of
mobile phone or similar device with an MHL cable.
Charge your mobile phones from the TV.
Two-way remote operation between TV and
mobile phone.
Video/Audio output from your mobile phone.
Notes:
- These functions may not be available depending
on the connected equipment.
- If there is no more battery life left in the
connected device, charging will not start.
- To operate the mobile phone with the TV remote,
you need to turn on the T-Link function first,
then press Option and select Quick access >
T-Link > Setup > Guide Menu. Follow the
virtual keypad to do operations.
Connecting MHL-compatible Device
Connect the MHL-compatible device to the
HDMI port identified with MHL on the TV using
an MHL cable (not supplied), charging will start
automatically.
When connecting an MHL-compatible device to the
HDMI port identified with MHL on the TV, switch the
TV source to HDMI 2 or HDMI.
Note: Do not connect the MHL-compatible device
to any ports other than HDMI port identified
with MHL.
When using MHL
Interoperability with MHL devices from other
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson 24FW4323W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson 24FW4323W in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info