559158
9
Zoom out
Zoom in
Previous page
1/15
Next page
English
EN 9
Using your TV Chapter 4
according to your country. At this step, you will be
requested to enter your password.
3. Press
▲/▼
to select Tuner mode, then press
◄/► to select
Antenna or Cable or
Satellite. (Note:
Satellite option may not be
available for certain models.) Then follow a) or b)
or c) below.
- a) If you have selected
Antenna.
Press ▲/▼ to select Channel install, and
press OK/► to enter.
Select Automatic search (Refer to Figure 2.),
then press OK/► to display Automatic search.
Press OK to skip the country selection and
enter the next step. Or use ◄/► to reselect
your country, then press OK to enter.
Select Digital & Analogue or Digital or
Analogue, then press OK/► to start the
automatic search, which relates to all DVB-T
digital and/or analogue channels.
- b) If you have selected
Cable.
Press ▲/▼ to select Channel install, and
press OK/► to enter.
Select Automatic search, then press OK/► to
display Automatic search.
Press OK to skip the country selection and
enter the next step. Or use ◄/► to reselect
your country, then press OK to enter.
- If you select Digital & Analogue, then
press OK/► to enter. Select your scan
mode if available and configure proper cable
information in the same way as in Initial
setup. Press ▲/▼ to select Scan and press
OK/► to start your automatic search relating
to all DVB-C digital and analogue channels.
- If you select Digital, then follow the same
process as above to start your automatic
search relating to all DVB-C digital channels.
- If you select Analogue, then press OK/►
to start your automatic search relating to all
analogue channels.
- c) If you have selected
Satellite.
Press ▲/▼ to select Channel install, and
press OK/► to enter.
Select Automatic search, then press OK/►
to enter. You can select a proper satellite or an
operator.
Press OK to go to the next step. Before you
start scanning, you can press OK to edit the
parameters of the selected satellite. Then
with your desired options of Scan mode and
Channels, select Scan and press OK/► to
start scanning.
4. The search may take a few minutes. During the
process, you can press Menu to abort halfway.
5. Once the automatic search ends, press Menu to
return to the previous step or press OK to restart
your channel search.
6. After the automatic search, channels are arranged
in a preset order. If you wish to skip channels,
modify the preset order or rename channels,
select Setup > Organiser and press OK/► to
enter.
Chapter 4 - Using your TV
Using your TV
Accessing channels
Using the numeric buttons: press the corresponding
numeric buttons to access the channels.
Using the PR+/- or P+/- buttons: scroll through the
channels.
Watching connected devices
There are three ways for you to select connected
devices on your TV:
you can press Menu on the remote control and
select Source.
you can use the OK button to enter, then press
▲/▼ and OK to select your wanted connected
devices
you can also repeatedly press Source on the
remote control or OK on the TV set to toggle
between TV and other input sources.
To resume TV viewing, you can press any numeric
button.
Note: Not all models have OK button on the set.
Volume
Volume control: use the VOL+/- or VOL ◄/► buttons
on the TV set or V+/- buttons on the remote control to
increase or decrease the volume.
Sound mute: press the Mute button to temporarily
mute the sound. Press this button again or the V+
button to restore it.
Using TV menus
1. Press Menu to display the main menu. (Refer to
Figure 3.)
2. Press ▲/▼/◄/► to select the desired item, then
press OK to open the corresponding submenu.
3. In submenus, use ▲/▼ to select menu options,
use ◄/► to set functions or change values. Use
OK to activate a setting. Use OK/► to open the
corresponding submenu.
4. Press Menu to return to the previous menu.
5. Press Exit to close the menu.
Note: Some options may not be available for
certain signal sources.
Selecting menu language
You can choose your preferred menu language
following the instructions below.
1. Press Menu to display the main menu.
2. Press ▲/▼/◄/► to select Setup, then press OK
to enter.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomson 24FW4323 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomson 24FW4323 in the language / languages: English as an attachment in your email.

The manual is 4,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info