Manual Thomashilfen Swifty 2 (page 21 of 108) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

682718

Zoom out

Zoom in

1/108

User manual – Swifty 2

Folding

NOTE: Be careful not to drop the rehab stroller onto the ﬂoor during folding to avoid bending and damaging the frame.

Make sure the plastic plug of the folding mechanism is in the correct position (higher end of the plug is pointing to the

rear of the rehab stroller). (Fig. 1)

CAUTION: The rehab stroller must not be folded up while the sun and rain cover is mounted.

Folding open

The Swifty 2 rehab stroller is equipped with a folding safety device on both push bar joints. To fold it open, the folding

safety device must be released on each side by means of one of the pushbuttons (Fig. 2). Then hold the buggy on the

top and on the side using the push bar and pull it upwards with a swinging movement (the locking slide audibly engag-

es). Loosen the clamping lever at the back and adjust the desired back angle (see the section on backrest adjustment).

Adjust the height-adjustable push bar to the desired position by pressing the side pushbuttons (Fig. 3).

Folding closed (smallest folded size)

Loosen the clamping lever at the back. Pull up the locking slides on the push bar (right and left). (Fig. 1) and hold onto

the safety bow mounted on the right-hand side. Using your upper body, push the push bar forward and fold the buggy

closed in a forward direction (Fig. 4). Press the backrest downwards and tighten the clamping lever again. Fold down

the push bar on the backrest.

The folding lock can be used to prevent accidental unfolding of the Swifty 2 rehab stroller. For this purpose, release the

button on each side of the folding lock (ﬁg. 2), guide the strap around the front frame and push the button closed again.

Now the Swifty 2 can be securely gripped and transported using the tubes of the frame.

Seat and back pads

The seat and back pads consist of a single unit. It is pulled over the backrest in such a manner that the red Swifty logo

is at the front and the lower part of the pad comes to rest on the seat. The rear of the pad is divided into two parts and

is closed with a zipper. Guide the two halves of the pad’s back under the Swifty 2’s rear bow (Fig. 5). Pull the pad into

place and close the zipper (Fig. 6). Finally, close the hook and loop closure at the lower end of the back (Figure 7).

Seat side guide pad

The opening of each seat side guide pad should point outwards/forwards. (Fig. 8) Pull the pad over the seat side guide

(Fig. 9). Close the zipper. (Fig. 10)

H-belt

The Swifty 2 rehab stroller is equipped with an H-belt as standard equipment.

Opening the belt buckle

To open the H-belt, press and hold the red pushbutton (1), open the clip lock (2 and 3) and release the belt (child safety

lock). (Fig. 11)

Adjusting the shoulder belt height

Open the zipper on the back pad. Open the upper folding buckles and pull the belts out from the front. Undo the back

pad to the desired height using the stitched seam. Pull the straps through the resulting slots and secure them again in the

folding buckles. Close the pad again. (Figs. 12-13)

Removing the H-belt

Open the zipper on the back pad. Open the folding buckles and pull out the H-belt from the front.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomashilfen Swifty 2 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomashilfen Swifty 2 Manual

Product: