Manual Thomas INOX 1530 (page 11 of 20) (English, German, Dutch, French)

485816

Zoom out

Zoom in

1/20

Assembly Instructions

Congratulations on your new purchase! Enjoy

your appliance to the full through correct usage.

To obtain the best service from your new appliance,

please read these instructions before use and follow

them carefully when operating the appliance.

Assembling the appliance

The parts required for the chassis are to be found

loosely packed in the carton.

Assembling the chassis A + B

Place the chassis ring upside down on a stable

surface.

Drive the shafts by the ribbed end into the bore-

holes provided on the chassis. (Some appliances

are supplied with the shafts ready-mounted.)

Then push the wheels in as far as they will go.

Turn the collecting bin upside down (i.e. opening

facing the floor).

Place the chassis ring on the collecting bin and

press down firmly until the ring snaps into place.

Stand the appliance back in an upright position.

Inserting the cartridge filter C

Pull out the plug

Place the new cartridge filter in an upright position

on the motor flange and gently but firmly slide

it into place on the filter mounting. Secure the

cartridge filter by means of the swivel clips.

Changing

Undo the snap fasteners, remove the motor block

from the collecting bin and turn over.

Turn the swivel clips in the direction indicated

and carefully remove the cartridge filter in an

upright position from the filter mounting.

Inserting the paper filter bag

Place the filter bag inside the collecting bin,

making sure that the opening located in the card-

board inlay is placed in line with the suction

soket.

Then press the filter bag evenly around the

sides of the collecting bin.

THOMAS paper filter bags are

essential when

vacuuming fine dust. However, they are also

recommended for normal use, as they not only

improve the retention of dust, but also make filter

changes more hygienic.

Fitting the motor block

Place the motor block onto the collecting bin,

making sure that the operating switch lies directly

in line with the middle of the suction socket.

Lastly, secure the motor block by means of both

snap fasteners.

Connecting the flexible hose

Firmly insert the flexible hose in the suction socket

and turn the hose until the button clicks into place

and the markings on both the suction socket and

the hose connecting piece correspond. (Remove

the hose by turning the hose connecting piece and

slowly withdrawing the hose.)

Then attach the desired accessories and the

appliance is ready for use.

Operating the appliance

The MultiVac is switched on and off by means of

the switch located on the motor block casing.

The mains supply voltage must correspond to the

voltage given on the rating plate.

Operation

Dry-vacuuming

Important!

The cartridge filter and the paper filter bag must be

fitted when dry-vacuuming. Plug in the appliance.

After use

Switch off the appliance and pull out the plug.

Wind the mains cable loosely in the hand and

store under the carrying handle.

Vacuuming liquids

If a paper filter bag has been fitted in the

appliance, remove it before vacuuming liquids, as

it will otherwise disintegrate.

When vacuuming liquids from a container, use only

the flexible hose or suction tubes.

Always ensure that the float is kept clean and in

good condition. It acts as a safety device and

automatically interrupts the flow of air when the

collecting bin is full.

Take care when vacuuming water from high-sided

containers or basins where the quantity Ievel

exceeds the liquid capacity of the collecting bin.

Remember that, in such a case, the water will

continue to flow from the container even if the

collecting bin is full and the float has stopped the

suction flow of the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomas INOX 1530 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomas INOX 1530 Manual

Product: