Manual Thomas BOXER (page 13 of 48) (English, German, Dutch, French)

666684

Zoom out

Zoom in

1/48

To select your suction power level use the air slide

(11, figureP):

– Air slide closed = full suction power

– Air slide open = reduced suction power

Wet vacuuming

Always remove the filter assembly (figure C,D) before

starting wet vacuuming, since otherwise the filter assembly

will be ruined.

Do not forget to unplug the power cord before removing the

motor housing (2) from the tank.

Keep the float valve (40, fig. S) clean and accessible at

all times. It automatically interrupts vacuuming when the

collecting bin is full.

When vacuuming out containers in which the liquid level is

higher than the top of the collecting bin and which have a

larger volume than the capacity of the collecting bin, liquid

can continue to be vacuumed beyond the capacity of the

collecting bin if the float valve is closed.

In such cases, vacuum only in partial amounts and intermittently

empty the collecting bin.

Lift the tube and flexible hose out of the liquid first and then turn off

the appliance afterwards, in order to prevent an afterflow of liquid.

A Open the snap fasteners and lift the motor block.

Remove the filters from the appliance, because they will

otherwise be damaged (figures C and D).

If the cleaning fluid tank is fitted, remove it (figure K).

H Place the motor block onto the collecting bin and close the snap

fasteners.

Connect the power cord.

J Connect flexible hose. Remove the hose by turning the hose

connecting piece to the side and withdrawing the hose.

P Close the air slide of the suction power control (11) on the handle.

N Switch on the appliance with the On/Off (6) switch. The pump

switch (7) must not light up.

After completion of wet vacuuming, please clean and dry the

appliance and the accessories used.

Spray extraction (shampooing)

Make sure that everything you intend to wet-clean or

shampoo is suitable for this procedure. Never wet-clean or

shampoo fine, hand-woven or non-coloured-fast carpets.

If the carpet has been shampooed before, it is possible that

you will obtain a great deal of foam when you use THOMAS

BOXER for the first time.

If this is the case, switch off the appliance and empty the

collecting bin.

Thereafter, in order to prevent excess foam, put 1⁄2 cup of

vinegar into the collecting bin.

Excess foaming will not occur after you have thoroughly

cleaned the carpet once with THOMAS cleaning concentrate,

because it contains a special anti-foam substance.

Ensure that there is always liquid in the fresh

water container when the spraying function is

switched on, in order to avoid possible damage to

the pump.

Carpet cleaning

A Open the snap-on fasteners and lift the motor block.

K Remove the lid of the cleaning fluid tank and fill the tank with

THOMAS ProTex cleaning concentrate.

See the bottle label for dosage instructions.

Use only lukewarm (max. 30 °C) water.

Replace the lid and insert the filled cleaning fluid tank into the

appliance.

G Take the suction hose for cleaning concentrate out of its holder

on the motor block.

L Place the motor block onto the collecting bin such that the

suction hose (36) is immersed all the way to the bottom of the

cleaning fluid tank and is not bent.

J Connect flexible hose. Remove the hose by turning the hose

connecting piece to the side and withdrawing the hose.

M Attach the retaining clips (15) at regular spaces along the

suction hose (13). Then clip the spray hose (18) into the

recesses in the retaining clips. Latch the spray lever (16) on the

handle. To do this, push the plastic ribs on the spray lever into

the recess on the handle. Make sure the spray lever is correctly

locked (see marking).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thomas BOXER in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thomas BOXER

Thomas BOXER User Manual - German, Polish - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thomas BOXER Manual

Product: