732497

Thomas 772 Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
10
HOW TO CONNECT AN ALTERNATIVE PLUG
If the fitted plug is not suitable for your socket outlet, then it
schould be cut off and disposed of in order to avoid a possible
shock hazard should it be inserted into a 13A socket elsewhere.
A suitable alternative plug of a least 13 Amp rating e.g. 15 Amp
round pin to BS546 should then be fitted to the cable.
The wires in this mains lead are coloured in accordance with the
following code: –
BLUE – “NEUTRAL” (“N”)
BROWN – “LIVE” (“L”)
GREEN AND YELLOW – “EARTH” (“E”)
1. The GREEN AND YELLOW wire must be connected to
the terminal in the plug which is marked with the letter
“E” or by the Earth symbol or coloured green or
green and yellow.
2. The BLUE wire must be connected to the terminal
which is marked with the letter “N” or coloured black.
3. The BROWN wire must be connected to the terminal
which is marked with the letter “L” or coloured red.
ELECTRICAL INFORMATION
WARNING:
THIS APPLIANCE MUST BE EARTHED
The mains lead of this appliance is fitted with a BS1363A 13
amp fused plug. To change a fuse in this type of plug use an
A.S.T.A. approved fuse to BS1362 type.
1. Remove the fuse cover (A) and fuse (B)
2. Fit replacement 13A fuse into fuse cover
3. Refit both into plug
IMPORTANT:
The fuse cover must be refitted when changing a fuse and if the
fuse cover is lost the plug must not be used until a correct repla-
cement is fitted.
Correct replacementes are identified by the colour insert or the
colour embossed in words on the base of the plug.
• Replacement fuse covers are available from your local Elec-
tricity Board Shop.
Congratulations on your new purchase
We recommed that you read these instructions carefully
in order to quickly become familiar with your new
appliance.
A good appliance, which is used properly, will serve
you for many years.
Unpacking the appliance
Dispose of packing materials in accordance with local
regulations.
Check the spin dryer for any transport damages, which
must be reported to the forwarding agent or goods
office responsible within 24 hours. In case of damage,
kindly send all relevant paperwork to the Customer
Service for further treatment.
Preparation for Use
1. Put the operating lever in the “OFF” (0)
position.
YELLOW & GREEN (E)
BROWN (L)
BLUE (N)
cable
clamp
2. Open the lid.
3. Remove the transport safeguard from inside the
spin drum.
4. We recommend that the spin drum be washed
out with a standard detergent before using for
the first time.
5. Place the spin dryer on a level floor at a
distance of about 50 cm away from the
wall or other objects. Never balance out
irregularities in the floor surface by laying wood,
paper or similar materials under the appliance.
Loading the machine
1. Place a sufficiently large container for excess
water under the outlet spout.
2. Plug the appliance in to a mains socket (please
observe the Points of Safety).
A
B
Operating Instructions
A
B
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thomas 772 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thomas 772 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info