576931
4
Zoom out
Zoom in
Previous page
1/12
Next page
4
MULTIPLE POSITIONS
SUMP DISCHARGE
Side Discharge
Rear Discharge
Installation
Marine Model
CAUTION: Toilet is not explosion proof and must not be
located in an area where an explosive atmosphere exists,
such as gasoline fumes, etc.
1. Install white fork-
shaped slides on
brackets. Make one
right bracket as-
sembly and one left
bracket assembly.
(Right bracket assembly shown.)
2. Mount bracket assemblies and sump to bottom of toilet
with four screws. Brackets are sandwiched between sump
and toilet.
3. Locate toilet position with template and install bolts
in oor drilling 7/32” dia. hole in oor, putting acorn
nut on screw, and driving bolts into oor with wrench.
Remove acorn nuts.
4. Also using template, locate position for plastic locator
disc. Drill 5/32” dia. hole in oor and fasten disc to oor
with at sides oriented parallel to sides of toilet.
Important: This disc prevents toilet from moving on
floor.
5. Install one nut on each bolt and screw nuts down until they
touch top of gauge. If
gauge is misplaced,
bottom surface of nuts
should be 1.34 in. (3.4
cm) above oor.
6. Lower toilet over bolts until nuts go through rectangular
holes in metal brackets, and the unit rests on its feet.
Marine Installation Instructions continue on Page 5.
Enfocus Software - Customer Support
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thetford Electra Magic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thetford Electra Magic in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info