641132
11
Zoom out
Zoom in
Previous page
1/42
Next page
Installation Manual 11
Install the Baffl es for an Upper Side-Wall Exhaust Vent
Make sure that all horizontal baffl es are the full width of the
inside of the enclosure and are in the correct location. If the
baffl es are not the full width of the enclosure or incorrectly
located, poor cooling performance can result.
If the enclosure depth is 24 inches or more and less than 26 inches (See Art02488):
- Install a wood, aluminum or galvanized steel top baffl e [13] between the top of
the refrigerator and the top of the upper exhaust vent [24].
- Make sure that the top baffl e is less than 1/4 inch [15] from the top of the
refrigerator and baffl e overlaps the refrigerator 1 inch or less.
- Make sure that the baffl e is against the wall of the vehicle at the top of the
upper exhaust vent and less than 1/4 inch above the opening for the upper
exhaust vent.
- Install an aluminum or galvanized steel bent-sheet condenser baffl e [26].
- Make sure that the bend of the condenser baffl e is the full width of the
inside of the enclosure.
- Make sure that the bend of the condenser baffl e is fl ush with the bottom
edge of the door frame of the upper side-wall exhaust vent.
- Make sure that the top edge of the condenser baffl e is 1/4 inch or less [15]
from the lower rear corner of the condenser.
If the enclosure depth is 26 inches or more (See Art02489):
- Install a wood, aluminum or galvanized steel top baffl e [13] between the top
of the refrigerator and the top of the upper exhaust vent [24].
- Make sure that the top baffl e is less than 1/4 inch [15] from the top of
the refrigerator and that the baffl e overlaps the refrigerator 1 inch or
less.
- Make sure that the baffl e is against the wall of the vehicle at the top of
the upper exhaust vent and less than 1/4 inch [15] above the opening
for the upper exhaust vent.
- Install a solid box baffl e [21] between the lower intake vent and the upper
exhaust vent.
- Make the solid box baffl e either from wood or from an aluminum or
galvanized-steel sheet.
- Make sure that the bottom of the solid box baffl e is 21 inches to 21 1/2
inches above the bottom of the enclosure [17] (7 1/4 inches to 7 3/4
inches above the top of the lower intake vent opening REF) [18].
- Make sure that the back of the solid box baffl e is perpendicular to the
bottom of the enclosure.
CAUTION
!
13
15 15
25
9
24
26
15
ART 02488
13
15 15
25
9
24
21
ART 02489
18
17
27
170
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thetford 2118 PolarMax at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thetford 2118 PolarMax in the language / languages: English as an attachment in your email.

The manual is 2,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thetford 2118 PolarMax

Thetford 2118 PolarMax Additional guide - English - 18 pages

Thetford 2118 PolarMax User Manual - English - 46 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info