648124

Thermor Equateur Manual

11
Zoom out
Zoom in
Previous page
1/23
Next page
2.1 Description of the remote control screen
99
99
9
1 Ambient temperature
2 Communication with the device
3 Warning, problem
4 Battery (replace batteries)
5 Manual mode
6 Programming Mode
7 Comfort Mode, Comfort –1°C, Comfort –2°C
8 Eco Mode
9 Frost Free Mode
Device off
ECO temperature display
COMFORT temperature display
Mode selection button
± buttons for adjusting COMFORT setting
± buttons for adjusting ECO setting
Note:
The remote control is supplied with its support which you can mount
on the wall using 2 screws.
Do not mount the support above the heater nor near to a heat source,
otherwise the ambient temperature display may give a false reading.
2.2 Screen on stand-by
Once the batteries have been correctly inserted into the unit, the remote control is on stand-by.
The screen is off.
2.3 Displaying the ambient temperature
The remote control is activated by pressing a button. The ambient temperature is displayed at the top of the screen. If
the settings are not altered, the screen switches itself off after 60 seconds and the remote control is once again on
stand-by.
2.4 Displaying the device configuration
When the ambient temperature is displayed, press a button again. The remote control retrieves the device’s configuration.
The o))) symbol flashes while it is searching.
The configuration is displayed on the screen when it has been retrieved.
The display varies depending on the unit configuration:
Manual mode: hand displayed only
Comfort or Eco mode: an arrow is displayed opposite a sun (comfort) or a moon (eco). The COMFORT or ECO
settings can then be altered using the ± buttons (
, ).
Programming mode: an arrow opposite the clock is displayed with another arrow opposite the programmed mode
(
,
,
for comfort, comfort - 1 and comfort -2, or , or , or
). The rest of the
display depends on the programmed mode.
Frost Free Mode: an arrow opposite a snowflake is displayed with a bar under the ECO and COMFORT
settings
Off: only an arrow opposite the symbol is displayed.
If the remote control fails to retrieve the device’s configuration, the problem is notified as below.
2.5 Changing the configuration
The user can alter the device’s configuration when it is displayed on the screen.
- Press the mode button
to change the displayed mode.
- Press button
to change the Comfort setting (varies in 0.5° intervals).
- Press button
to change the Eco setting (varies in 0.5° intervals).
1
2
4
5
3
6
7
8
9
99
99
9
is displayed: - stand opposite the device
- direct the remote control correctly towards the device’s infrared cell
88
88
8
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thermor Equateur at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thermor Equateur in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info