600941
13
Zoom out
Zoom in
Previous page
1/37
Next page
13
6. Boiler operation
Description of the control panel:
Control panel is simple and intuitive and displays the boiler functions.
The panel uses colour-coding and graphical division of the heating and DHW preparation sections. LEDs
positioned between the buttons for setting the temperature higher/lower (up/down arrows) are turned on if the
particular mode is selected (i.e. either the DHW
2
preparation mode or the heating water mode marked TOP).
If the display shows any other variable, pressing one of the , buttons (1) displays the heating water
temperature (the LED “°C” TOP is turned on).
If the display shows any other variable, pressing one of the , buttons (2) displays the DHW temperature
(the LED “°C” TUV is turned on).
Changing the value of the desired variable: When the heating water temperature is displayed (the LED “°C”
TOP is on), the first pressing of one of the heating temperature setting buttons displays the setting for the
required value of this temperature. This is indicated by the flashing of LED “°C” TOP. Required value can be
changed within the ranges defined in the service menu. The set value becomes automatically registered in the
memory after 15 seconds of inactivity (measured after the last button was pressed).
The required DHW temperature is set in a similar fashion (by the DHW temperature setting buttons).
The five LEDs below the main display show the variables which are currently set or indicated on the 3-digit
display:
- if the LED °C (TOP or TUV) is on, the display shows the temperature of water in the heating or DHW
circuits
- if the LED “
IN
/
OUT
°
°°
°C ” is on, the display shows the temperature of the outdoor or room temperature sensors
- if the LED “HDO” is on, the MRC signal is activated and the boiler produces heat in the low tariff
- if the LED “bar” is on, the display shows the pressure in the TOP system in bars
Automatic control elements (user access):
1. Buttons for displaying heating temperature settings , (1) higher/lower, additionally, if
selected, browsing through the service MENU
2. Buttons for displaying DHW temperature settings , (2) - higher/lower, the flashing value of
the selected variable can be also changed in the menu)
3. Heating on/off button O/I (MENU) (3) (press shortly), open the MENU (press for more than 2
seconds), exit the MENU (press shortly)
4. DHW heating on/off button O/I (ENTER) (4) (press shortly), ENTER (press shortly only in the
MENU)
5. SELECT – main display selection button (SELECT) (5):
temperature (according to the menu and selected option)
• water pressure (bar)
• output (kW)
• error messages (last error)
• heating mode
6. 3-digit 7-segment LED display
7. 7 LED indicators for the selected functions
2 The Czech abbreviation for DHW is TUV: translator's note.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thermona THERM EL 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thermona THERM EL 45 in the language / languages: English as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info