532670
83
Zoom out
Zoom in
Previous page
1/85
Next page
Page.83
Each of 8 programs can be set to go ON and OFF at
specific times
at set temperatures.
1. Select Program Mode from the left sidebar.
2. Turn ON desired Program (1 8) by touching the
power button.
3. To change days, times, or ON/OFF temperature, touch
the program number (circle 1).
4. Touch the section of the setting wheel to be
changed (time, temp, day). Change the setting.
5. Confirm your changes by touching the yellow
check mark.
NOTE: To delete a program, touch that
program number and go to program
settings. Touch red CLEAR button and
then touch the red check mark.
The room temperature is measured and then compared
to the set temperature. The flame height automatically
adjusts to achieve
the set temperature.
1. Select Thermostatic Mode from the left sidebar.
2.0Touch the color wheel to set the temperature. Blue is
the low- est temperature setting and red is the highest.
After touching the color wheel, the new set temperature is
shown in the middle of the circle for apprx. 3 seconds.
After 3 seconds, the room temperature is shown in the
middle of the circle. An arrow either above or below the
room temperature indicates the flame height
going up or down to reach set temperature.
Save energy while enjoying a changing, real-
istic flame picture.
1. Select Eco Mode from the left sidebar.
2. Choose between low fire, medium fire,
and high fire.
3. Choose time button (15 min, 20 min,
or 25 min). The percent- age of energy
saved is shown in the circle/leaf.
NOTE: A shorter time cycle re-
sults in a more active flame pic-
ture. Automatic Energy Saving
Mode Corresponds to the set
temperature in Thermostatic
Mode.
At the end of a preset countdown time, the fire
turns off.
1. Select Countdown Timer from the left or
right/bottom sidebars.
2. Spin the hour wheel to set hour. Spin the minute
wheel to set minutes.
3. Touch power button to start Countdown Timer.
The time remaining is shown on top of screen next
to hourglass icon.
4. Touch power button to stop Countdown Timer.
NOTE: Countdown Timer only works in
Manual, Thermostatic, and Eco modes.
1. Touch/slide auto temperature button next to flame button to ON.
If the room temperature is lower than the set temperature, the flame height stays on high for a longer period of time. If the room tem-
perature is higher than the set temperature, the flame height stays on low for a longer period of time.
2. Choose the time button (15 min, 20 min, or 25 min). The percentage of energy saved is shown in the circle/leaf.
NOTE: A shorter time cycle results in a more active flame picture.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thermocet Trimline Quadro 46 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thermocet Trimline Quadro 46 in the language / languages: English, German, Dutch, Danish, French, Spanish as an attachment in your email.

The manual is 5,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thermocet Trimline Quadro 46

Thermocet Trimline Quadro 46 Installation Guide - English - 85 pages

Thermocet Trimline Quadro 46 Usermanual and installation guide - English - 34 pages

Thermocet Trimline Quadro 46 Installation Guide - German, Dutch - 85 pages

Thermocet Trimline Quadro 46 Usermanual and installation guide - Dutch - 34 pages

Thermocet Trimline Quadro 46 Installation Guide - Danish, French, Spanish - 85 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info