Manual Thermocet Trimline 100 (page 27 of 41) (English)

532678

Zoom out

Zoom in

1/41

Page.27

13. PROBLEMS AND POSSIBLE SOLUTIONS

Please first check if all guidelines were followed before attempting to solve any problems with the unit.

Warning:

Solving problems with your unit, whether gas related or electrical, must always be performed by a qualified tech-

nician.

SYMPTOM ACTION TO BE TAKEN

The pilot flame will not

light. After repeated ignition.

1. There is air in the pipes if you switch the unit on for the first time or after a

service. It will take a little while until all the air has flowed out of the pipes

and gas flows through that can be ignited. Take it away and try to switch the

pilot flame on several times in order to allow the air to escape.

2. See whether the gas pipe to the unit is open and if there is sufficient gas pres-

sure to the unit.

3. Check whether there are sparks between the spark electrode and the pilot. If

there are no sparks:

a) Check whether the connection between the electrode and the ignition is bro-

b) ken or faulty.

b) Check whether the spark short circuits at another point or jumps.

c) Check whether the electrode is broken.

The pilot flame will not re-

main alight after ignition.

1. Check whether the pilot flame is large enough to burn around the

thermocouple.

If the flame is too small, you need to check the gas feed pressure. If the size

of the pilot flame cannot be adjusted, there may be an obstruction in the pilot.

2. Check whether the thermocouple interrupter is connected to the gas valve

properly.

3. Check that the gas valve is not faulty.

4. Check whether the restriction plate has been placed according to instructions

(see page 20).

The main burner goes out

when the unit is warm.

1. This can be a normal effect of the thermostat.

Check whether the pilot flame is able to heat the thermocouple adequately. If

the pilot flame is too small then the gas pipe or the pilot flame adjustment

need to be checked.

2. Check whether the restriction plate has been placed according to instructions

3. (see page 20).

Soot deposits on the glass. 1. Check whether the lava split is lying on the burner in the correct manner.

2. Check if the pilot burner is free from burner filling.

3. Check whether there is any blockage in the burner openings

4. Check if the flue tube is functioning correctly and if the flue tube is not dis-

turb or blocked.

5. Check the pipe pressure.

Sharp blue flames that are

released by the burner or a

pilot that burns too wildly.

1. Check whether the restriction plate has been used.

Weak (stifling) pilot flame. 1. Check the pilot burner pressure or duct pathway

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Thermocet Trimline 100 in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thermocet Trimline 100

Thermocet Trimline 100 Usermanual and installation guide - Dutch - 39 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Thermocet Trimline 100 Manual

Product: