607233
25
Zoom out
Zoom in
Previous page
1/36
Next page
Pag.25
13. MAINTENANCE FAULT CHECKLIST.
Please note: whenever possible, turn off the gas supply and power supply during maintenance activities.
Maintenance activities should be performed by a qualified fitter.
Close the gas tap while maintenance activities are being performed
Inspect
Works OK
1 General inspec-
tion
a The main burner should ignite smoothly (within several seconds) and not give a bang sound due
to delayed ignition. Go to number 7 if the ignition appears to be delayed.
b Check the appearance of the flame. The flame should not flicker. It should turn yellow after ap-
proximately 15 minutes; go to number 7 if the flame is blue in colour.
c Check for excessive soot deposits on decorative parts. Go to number 7 if there is excessive for-
mation of soot.
2 Decorative parts
(logs/pebbles etc.)
and (pilot) burner
a remove decorative parts and clean the burner (be careful with ceramic burners!) with a vacuum
cleaner.
b inspect decorative parts for damage/cracks/discolouration and clean with a soft brush if required.
c check if the burner cover is intact and free of corrosion. Replace the burner if required.
d after completing the inspection: replace decorative parts, exactly as stipulated by the manufac-
turer. Ensure the pilot burner is free from obstructions!
e check if the pilot flame protection is intact (if applicable).
f check the piezo for sufficient sparking power, and ensure that the ignition cable is free from
metal parts/electrical parts.
3 Ignition and op-
eration of the
main burner
a check if the injector head is free from dirt.
b check if the primary ventilation opening in the main burner is free from dirt.
c
Check the burner and whether it is in a good position in relation to the pilot burner. (if applica-
ble)
d check that the burner is firmly positioned and cannot move.
e check if the pilot burner is burning well, with a steady blue flame
f
check whether the burner is uniformly igniting across the entire surface and without any signifi-
cant delay.
g check if the appearance of the flame is uniform and stable.
h check the initial and burner pressure. Do not forget to close the pressure measuring points.
i check whether the gas control parts are intact, and that plastic parts for example, have not
melted.
j
check electrical wiring for damage and ensure that wires are positioned away from the hot areas
of the unit.
4 Installation a
check whether there is a sufficient distance between the unit and any flammable furniture for
instance.
5 Flue tube/air sup-
ply
a where possible, inspect the general state of the exhaust/supply system and check for blockages /
leaks / corrosion.
b check the outlet, which should be free from dirt and blockages.
c specifically check for leaking cement borders, etc.
6 Remote control a check for correct functioning of the remote control.
7 Ventilators (if
present)
a clean the ventilators and check that they function correctly.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thermocet Transparente 140 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thermocet Transparente 140 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thermocet Transparente 140

Thermocet Transparente 140 Usermanual and installation guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info