607231
27
Zoom out
Zoom in
Previous page
1/36
Next page
Pag.27
15. Positioning the ceramic wood blocks TRANSPARENTE 73-100-120-140-160 AB
(See pages 29, 30, 31, 32 and 33 )
Please note:
when installing the log inset and the various glowing materials and accessories, the following must
be taken into account:
* There should be no glowing material in or on the pilot burner.
* Arrange the log inset composition as shown. In other words the blocks will have to be positioned in exactly
the same way. An individual structure to ensure this will need to be used where required.
* Mix the glowing material (lava granules) and the “fusilli” (spiral-shaped ceramic material) and spread them
evenly over the burner and the burner plate so that they are just covered. Glowing embers can be placed here
and there as decoration.
NOTE: the remaining material can be discarded. If you place too much glowing material this can affect the
burning process.
* Then place the logs in the correct order as shown on pages 30 to 34
* Carefully position the log inset.
Different positions may have a significant influence on the flame image or cause poor functioning of the burning
process.
16. Positioning the Pebbleset - TRANSPARENTE 73-100-120-140-160 AB(See page 34)
* Scatter vermiculite evenly over the burner tray. Make sure the pilot light remains unobstructed.
* Place a row of medium-sized and large pebbles at the front of the burner plate
* Fill the burner tray with small and medium-sized pebbles from the front to the rear. Place the pebbles as
closely as possible to each other on the burner tray.
* Fill the rear of the burner plate with medium-sized and large pebbles.
* Replace the window, following the instructions for removing it in reverse order.
17. Positioning the Carrara stones - TRANSPARENTE 73-100-120-140-160 AB (See page 34)
* Scatter vermiculite evenly over the burner tray. Make sure the pilot light remains unobstructed.
* Fill the burner tray neatly and evenly with the Carrara stones.
* Replace the window, following the instructions for removing it in reverse order.
When the whole assembly is ready, you should perform a test-run ignition. Start the procedure as described in
the operating instructions.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Thermocet Transparente 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Thermocet Transparente 100 in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Thermocet Transparente 100

Thermocet Transparente 100 Usermanual and installation guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info